Rfc2940
TitleDefinitions of Managed Objects for Common Open Policy Service (COPS) Protocol Clients
AuthorA. Smith, D. Partain, J. Seligson
DateOctober 2000
Format:TXT, HTML
Status:PROPOSED STANDARD






Network Working Group                                            A. Smith
Request for Comments: 2940                                     Consultant
Category: Standards Track                                      D. Partain
                                                                 Ericsson
                                                              J. Seligson
                                                          Nortel Networks
                                                             October 2000


  Definitions of Managed Objects for Common Open Policy Service (COPS)
                            Protocol Clients

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2000).  All Rights Reserved.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in TCP/IP based internets.
   In particular it defines objects for managing a client of the Common
   Open Policy Service (COPS) protocol.

   This memo includes a MIB module in a manner that is compliant to the
   SMIv2 [V2SMI].


















RFC 2940                    COPS Client MIB                 October 2000


1.  The SNMP Management Framework

   The SNMP Management Framework presently consists of five major
   components:

      o  An overall architecture, described in an Architecture for
         Describing SNMP Management Frameworks [ARCH].

      o  Mechanisms for describing and naming objects and events for the
         purpose of management.  The first version of this Structure of
         Management Information (SMI) is called SMIv1 and described in
         STD 16, RFC 1155 [V1SMI], STD 16, RFC 1212 [V1CONCISE] and RFC
         1215 [V1TRAPS].  The second version, called SMIv2, is described
         in STD 58, RFC 2578 [V2SMI], STD 58, RFC 2579 [V2TC] and STD
         58, RFC 2580 [V2CONFORM].

      o  Message protocols for transferring management information.  The
         first version of the SNMP message protocol is called SNMPv1 and
         described in STD 15, RFC 1157 [V1PROTO].  A second version of
         the SNMP message protocol, which is not an Internet standards
         track protocol, is called SNMPv2c and described in RFC 1901
         [V2COMMUNITY] and RFC 1906 [V2TRANS].  The third version of the
         message protocol is called SNMPv3 and described in RFC1906
         [V2TRANS], Message Processing and Dispatching [V3MPC] and
         User-based Security Model [V3USM].

      o  Protocol operations for accessing management information.  The
         first set of protocol operations and associated PDU formats is
         described in STD 15, RFC 1157 [V1PROTO].  A second set of
         protocol operations and associated PDU formats is described in
         RFC 1905 [V2PROTO].

      o  A set of fundamental applications described in SNMPv3
         Applications [V3APPS] and the view-based access control
         mechanism described in View-based Access Control Model
         [V3VACM].

   A more detailed introduction to the current SNMP Management Framework
   can be found in RFC 2570 [V3INTRO].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the mechanisms defined in the SMI.

   This memo specifies a MIB module that is compliant to the SMIv2.  A
   MIB conforming to the SMIv1 can be produced through the appropriate
   translations.  The resulting translated MIB must be semantically
   equivalent, except where objects or events are omitted because no



RFC 2940                    COPS Client MIB                 October 2000


   translation is possible (use of Counter64).  Some machine readable
   information in SMIv2 will be converted into textual descriptions in
   SMIv1 during the translation process.  However, this loss of machine
   readable information is not considered to change the semantics of the
   MIB.

2.  Overview

   The COPS protocol [COPS] is a client-server protocol intended for the
   communication of policy requests and decisions between a Policy
   Enforcement Point (PEP) and a Policy Decision Point (PDP).  The PEP
   acts as a COPS client in this scenario.  The model for policy out-
   sourcing, of which the COPS protocol provides one part, is described
   in [FRAMEWORK].

2.1.  Scope

   This MIB is intended to provide management of the important features
   of a COPS protocol client module. It does not provide management for
   a COPS server - this is outside the scope of the current memo.  It
   provides for monitoring of status and protocol statistics, as well as
   for configuration of the client, in particular for telling it where
   to locate its servers.  Other mechanisms for achieving this function
   without SNMP configuration might include use of the Service Location
   Protocol [SRVLOC] although this is outside the scope of this memo and
   are not specified by the COPS protocol itself.

   This MIB also does not provide management of specific COPS client-
   types e.g., for use with the RSVP protocol [RSVP][COPSRSVP].

3.  Structure of COPS Client MIB

   Objects in this MIB are arranged into groups.  Each group is
   organized as a set of related objects. The overall structure is
   described below.

3.1.  copsClientCapabilitiesGroup

   This group contains objects that represent COPS protocol capabilities
   implemented by this COPS client.

3.2.  copsClientStatusGroup

   This group contains objects that indicate the current status of
   connection(s) to COPS servers, including per-server protocol
   statistics.  It maintains last-known statistics for all of the
   servers with which the client has ever been connected since agent
   restart.



RFC 2940                    COPS Client MIB                 October 2000


3.3.  copsConfigGroup

   This group contains objects that allow for configuration of COPS
   server addresses and the order to which connections should be
   attempted.  It contains a table of per-server objects as well as
   scalars for configuration of the retry algorithm to be used by a
   client to obtain a connection to an appropriate server.

3.4.  Textual Conventions

   The datatypes CopsClientState, CopsServerEntryType, CopsErrorCode,
   CopsTcpPort and CopsAuthType are used as textual conventions in this
   document.  These textual conventions have NO effect on either the
   syntax nor the semantics of any managed object.  Objects defined
   using these conventions are always encoded by means of the rules that
   define their primitive type.  Hence, no changes to the SMI or the
   SNMP are necessary to accommodate these textual conventions which are
   adopted merely for the convenience of readers.

3.5.  Relationship to Other MIBs

3.5.1.  Relationship to the 'system' group

   This MIB contains definitions for a single COPS protocol client
   represented by a single SNMP agent and instance of the MIB-2 system
   group [MIB2].  It does not address the case of multiple co-located
   COPS protocol clients.

4.  Definitions for COPS Client MIB

COPS-CLIENT-MIB DEFINITIONS ::= BEGIN

-- -------------------------------------------------------------
-- -------------------------------------------------------------

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
    Unsigned32, mib-2
        FROM SNMPv2-SMI
    TimeStamp, TimeInterval, RowStatus, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB;


--    REFERENCE



RFC 2940                    COPS Client MIB                 October 2000


--        "The COPS (Common Open Policy Service) Protocol RFC 2748

copsClientMIB MODULE-IDENTITY
    LAST-UPDATED "200009280000Z"
    ORGANIZATION "IETF RSVP Admission Policy Working Group"
    CONTACT-INFO
        "       Andrew Smith (WG co-chair)
         Phone: +1 408 579 2821
         Email: ah_smith@pacbell.net

                Mark Stevens (WG co-chair)
         Phone: +1 978 287 9102
         Email: markstevens@lucent.com

         Editor: Andrew Smith
         Phone: +1 408 579 2821
         Email: ah_smith@pacbell.net

         Editor: David Partain
         Phone: +46 13 28 41 44
         Email: David.Partain@ericsson.com

         Editor: John Seligson
         Phone: +1 408 495 2992
         Email: jseligso@nortelnetworks.com"

    DESCRIPTION
        "The COPS Client MIB module"

    REVISION    "200009280000Z"
    DESCRIPTION "This version published as RFC 2940"

    ::= { mib-2 89 }

copsClientMIBObjects OBJECT IDENTIFIER ::= { copsClientMIB 1 }

-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

CopsClientState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value indicating the state of a COPS client."
    SYNTAX      INTEGER {
            copsClientInvalid(1),      -- default state.
            copsClientTcpconnected(2), -- TCP connection up but COPS
                                       -- not yet open.



RFC 2940                    COPS Client MIB                 October 2000


            copsClientAuthenticating(3), -- TCP connection up but still
                                         -- authenticating.
            copsClientSecAccepted(4),  -- connection authenticated.
            copsClientAccepted(5),     -- COPS server accepted client.
            copsClientTimingout(6)     -- Keepalive timer has expired,
                                       -- client is in process of
                                       -- tearing down connection.
    }

CopsServerEntryType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value indicating how a COPS server entry came into existence."
    SYNTAX      INTEGER {
            copsServerStatic(1),        -- configured by manager
            copsServerRedirect(2)       -- notified by COPS server
    }

CopsErrorCode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value describing a COPS protocol error. Codes are identical
         to those used by the COPS protocol itself."
    SYNTAX      INTEGER {
            errorOther(0),             -- none of the below
            errorBadHandle(1),
            errorInvalidHandleReference(2),
            errorBadMessageFormat(3),
            errorUnableToProcess(4),
            errorMandatoryClientSiMissing(5),
            errorUnsupportedClientType(6),
            errorMandatoryCopsObjectMissing(7),
            errorClientFailure(8),
            errorCommunicationFailure(9),
            errorUnspecified(10),        -- client-type specific subcode
            errorShuttingDown(11),
            errorRedirectToPreferredServer(12),
            errorUnknownCopsObject(13),
            errorAuthenticationFailure(14),
            errorAuthenticationMissing(15)
    }
--  REFERENCE
--      "RFC 2748 section 2.2.8"

CopsTcpPort ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value indicating a TCP protocol port number."



RFC 2940                    COPS Client MIB                 October 2000


    SYNTAX      INTEGER (0..65535)

CopsAuthType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value indicating a type of security authentication mechanism."
    SYNTAX      INTEGER {
        authNone(0),
        authOther(1),
        authIpSecAh(2),
        authIpSecEsp(3),
        authTls(4),
        authCopsIntegrity(5)
    }

-- -------------------------------------------------------------

copsClientCapabilitiesGroup OBJECT IDENTIFIER
                            ::= { copsClientMIBObjects 1 }

-- -------------------------------------------------------------
--
-- Capabilities of the COPS client to connect to a COPS server:
--
copsClientCapabilities OBJECT-TYPE
    SYNTAX      BITS {
        copsClientVersion1(0),     -- supports version1 of COPS protocol
        copsClientAuthIpSecAh(1) , -- supports IP-SEC Authentication
        copsClientAuthIpSecEsp(2), -- supports IP-SEC Encryption
        copsClientAuthTls(3),      -- supports Transport-Layer Security
        copsClientAuthInteg(4)     -- supports COPS Integrity
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A list of the optional capabilities that this COPS client
        supports."
    ::= { copsClientCapabilitiesGroup 1 }

-- -------------------------------------------------------------

copsClientStatusGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 2 }

-- -------------------------------------------------------------
--
-- Current status of COPS server connections, all read-only.
--




RFC 2940                    COPS Client MIB                 October 2000


copsClientServerCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CopsClientServerCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of information regarding COPS servers as seen from the
        point of view of a COPS client. This table contains entries
        for both statically-configured and dynamically-learned servers
        (from a PDP Redirect operation). One entry exists in this table
        for each COPS Client-Type served by the COPS server. In addition,
        an entry will exist with copsClientServerClientType 0 (zero)
        representing information about the underlying connection itself:
        this is consistent with the COPS specification which reserves
        this value for this purpose."

    ::= { copsClientStatusGroup 1 }

copsClientServerCurrentEntry OBJECT-TYPE
    SYNTAX      CopsClientServerCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of information regarding a single COPS server serving
        a single COPS Client-Type from the point of view of a COPS
        client."
    INDEX { copsClientServerAddressType, copsClientServerAddress,
            copsClientServerClientType }
    ::= { copsClientServerCurrentTable 1 }

CopsClientServerCurrentEntry ::=
    SEQUENCE {
        copsClientServerAddressType         InetAddressType,
        copsClientServerAddress             InetAddress,
        copsClientServerClientType          INTEGER,
        copsClientServerTcpPort             CopsTcpPort,
        copsClientServerType                CopsServerEntryType,
        copsClientServerAuthType            CopsAuthType,
        copsClientServerLastConnAttempt     TimeStamp,
        copsClientState                     CopsClientState,
        copsClientServerKeepaliveTime       TimeInterval,
        copsClientServerAccountingTime      TimeInterval,
        copsClientInPkts                    Counter32,
        copsClientOutPkts                   Counter32,
        copsClientInErrs                    Counter32,
        copsClientLastError                 CopsErrorCode,
        copsClientTcpConnectAttempts        Counter32,
        copsClientTcpConnectFailures        Counter32,
        copsClientOpenAttempts              Counter32,



RFC 2940                    COPS Client MIB                 October 2000


        copsClientOpenFailures              Counter32,
        copsClientErrUnsupportClienttype    Counter32,
        copsClientErrUnsupportedVersion     Counter32,
        copsClientErrLengthMismatch         Counter32,
        copsClientErrUnknownOpcode          Counter32,
        copsClientErrUnknownCnum            Counter32,
        copsClientErrBadCtype               Counter32,
        copsClientErrBadSends               Counter32,
        copsClientErrWrongObjects           Counter32,
        copsClientErrWrongOpcode            Counter32,
        copsClientKaTimedoutClients         Counter32,
        copsClientErrAuthFailures           Counter32,
        copsClientErrAuthMissing            Counter32
    }

copsClientServerAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of address in copsClientServerAddress."
    ::= { copsClientServerCurrentEntry 1 }

copsClientServerAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IPv4, IPv6 or DNS address of a COPS Server. Note that,
        since this is an index to the table, the DNS name must be
        short enough to fit into the maximum length of indices allowed
        by the management protocol in use."
    REFERENCE
        "RFC 2748 section 2.3"
    ::= { copsClientServerCurrentEntry 2 }

copsClientServerClientType OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The COPS protocol Client-Type for which this entry
        applies. Multiple Client-Types can be served by a single
        COPS server. The value 0 (zero) indicates that this
        entry contains information about the underlying connection
        itself."
    REFERENCE
        "RFC 2748 section 6, IANA"



RFC 2940                    COPS Client MIB                 October 2000


    ::= { copsClientServerCurrentEntry 3 }

copsClientServerTcpPort OBJECT-TYPE
    SYNTAX      CopsTcpPort
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TCP port number on the COPS server to which the
        client should connect/is connected."
    ::= { copsClientServerCurrentEntry 4 }

copsClientServerType OBJECT-TYPE
    SYNTAX      CopsServerEntryType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicator of the source of this COPS server information.
        COPS servers may be configured by network management
        into copsClientServerConfigTable and appear in this entry
        with type copsServerStatic(1). Alternatively, the may be
        notified from another COPS server by means of the COPS
        PDP-Redirect mechanism and appear as copsServerRedirect(2)."
    ::= { copsClientServerCurrentEntry 5 }

copsClientServerAuthType OBJECT-TYPE
    SYNTAX      CopsAuthType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicator of the current security mode in use between
        client and this COPS server."
    ::= { copsClientServerCurrentEntry 6 }

copsClientServerLastConnAttempt OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Timestamp of the last time that this client attempted to
        connect to this COPS server."
    ::= { copsClientServerCurrentEntry 7 }

copsClientState  OBJECT-TYPE
    SYNTAX      CopsClientState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state of the connection and COPS protocol with respect



RFC 2940                    COPS Client MIB                 October 2000


        to this COPS server."
    ::= { copsClientServerCurrentEntry 8 }

copsClientServerKeepaliveTime OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the COPS protocol Keepalive timeout, in
        centiseconds, currently in use by this client, as
        specified by this COPS server in the Client-Accept operation.
        A value of zero indicates no keepalive activity is expected."
    REFERENCE
        "RFC 2748 section 3.7, 4.4"
    ::= { copsClientServerCurrentEntry 9 }

copsClientServerAccountingTime   OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the COPS protocol Accounting timeout, in
        centiseconds, currently in use by this client, as specified
        by the COPS server in the Client-Accept operation. A value
        of zero indicates no accounting activity is to be performed."
    REFERENCE
        "RFC 2748 section 3.7"
    ::= { copsClientServerCurrentEntry 10 }

copsClientInPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from this COPS server marked for this Client-Type.
        This value is cumulative since agent restart and is not zeroed
        on new connections."
    ::= { copsClientServerCurrentEntry 11 }

copsClientOutPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has sent to this COPS server marked for this Client-Type. This
        value is cumulative since agent restart and is not zeroed on new



RFC 2940                    COPS Client MIB                 October 2000


        connections."
    ::= { copsClientServerCurrentEntry 12 }

copsClientInErrs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from this COPS server marked for this Client-Type
        that contained errors in syntax. This value is cumulative since
        agent restart and is not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 13 }

copsClientLastError OBJECT-TYPE
    SYNTAX      CopsErrorCode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The code contained in the last COPS protocol Error Object
        received by this client from this COPS server marked for this
        Client-Type. This value is not zeroed on COPS Client-Open
        operations."
    REFERENCE
        "RFC 2748 section 2.2.8"
    ::= { copsClientServerCurrentEntry 14 }

copsClientTcpConnectAttempts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the number of times that this COPS client has tried
        (successfully or otherwise) to open an TCP connection to a COPS
        server. This value is cumulative  since agent restart and is not
        zeroed on new connections. This value is not incremented for
        entries representing a non-zero Client-Type."
    ::= { copsClientServerCurrentEntry 15 }

copsClientTcpConnectFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the number of times that this COPS client has failed
        to open an TCP connection to a COPS server. This value is
        cumulative since agent restart and is not zeroed on new
        connections. This value is not incremented for



RFC 2940                    COPS Client MIB                 October 2000


        entries representing a non-zero Client-Type."
    ::= { copsClientServerCurrentEntry 16 }

copsClientOpenAttempts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the number of times that this COPS client has tried
        to perform a COPS Client-Open to a COPS server for this
        Client-Type. This value is cumulative since agent restart and is
        not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 17 }

copsClientOpenFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the number of times that this COPS client has failed
        to perform a COPS Client-Open to a COPS server for this
        Client-Type. This value is cumulative since agent restart and is
        not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 18 }

copsClientErrUnsupportClienttype OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers that referred to Client-Types
        that are unsupported by this client. This value is cumulative
        since agent restart and is not zeroed on new connections. This
        value is not incremented for entries representing a non-zero
        Client-Type."
    ::= { copsClientServerCurrentEntry 19 }

copsClientErrUnsupportedVersion OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        had a COPS protocol Version number that is unsupported by this
        client. This value is cumulative since agent restart and is not
        zeroed on new connections."



RFC 2940                    COPS Client MIB                 October 2000


    ::= { copsClientServerCurrentEntry 20 }

copsClientErrLengthMismatch OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        had a COPS protocol Message Length that did not match the actual
        received message. This value is cumulative since agent restart
        and is not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 21 }

copsClientErrUnknownOpcode OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        had a COPS protocol Op Code that was unrecognised by this
        client. This value is cumulative since agent restart and is not
        zeroed on new connections."
    ::= { copsClientServerCurrentEntry 22 }

copsClientErrUnknownCnum OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        contained a COPS protocol object C-Num that was unrecognised by
        this client. This value is cumulative since agent restart and is
        not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 23 }

copsClientErrBadCtype OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        contained a COPS protocol object C-Type that was not defined for
        the C-Nums known by this client. This value is cumulative since
        agent restart and is not zeroed on new connections."



RFC 2940                    COPS Client MIB                 October 2000


    ::= { copsClientServerCurrentEntry 24 }

copsClientErrBadSends OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        attempted to send to COPS servers marked for this Client-Type
        that resulted in a transmit error. This value is cumulative
        since agent restart and is not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 25 }

copsClientErrWrongObjects OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        did not contain a permitted set of COPS protocol objects. This
        value is cumulative since agent restart and is not zeroed on new
        connections."
    ::= { copsClientServerCurrentEntry 26 }

copsClientErrWrongOpcode OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of COPS messages that this client
        has received from COPS servers marked for this Client-Type that
        had a COPS protocol Op Code that should not have been sent to a
        COPS client e.g. Open-Requests. This value is cumulative since
        agent restart and is not zeroed on new connections."
    ::= { copsClientServerCurrentEntry 27 }

copsClientKaTimedoutClients OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of times that this client has
        been shut down for this Client-Type by COPS servers that had
        detected a COPS protocol Keepalive timeout. This value is
        cumulative since agent restart and is not zeroed on new
        connections."
    ::= { copsClientServerCurrentEntry 28 }



RFC 2940                    COPS Client MIB                 October 2000


copsClientErrAuthFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of times that this client has
        received a COPS message marked for this Client-Type which
        could not be authenticated using the authentication mechanism
        used by this client."
    ::= { copsClientServerCurrentEntry 29 }

copsClientErrAuthMissing OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the total number of times that this client has
        received a COPS message marked for this Client-Type which did not
        contain authentication information."
    ::= { copsClientServerCurrentEntry 30 }


-- -------------------------------------------------------------

copsClientConfigGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 3 }

-- -------------------------------------------------------------

copsClientServerConfigTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF CopsClientServerConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of possible COPS servers to try to connect to in order
        of copsClientServerConfigPriority. There may be multiple
        entries in this table for the same server and client-type which
        specify different security mechanisms: these mechanisms will
        be attempted by the client in the priority order given. Note
        that a server learned by means of PDPRedirect always takes
        priority over any of these configured entries."
    ::= { copsClientConfigGroup 1 }

copsClientServerConfigEntry OBJECT-TYPE
    SYNTAX      CopsClientServerConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of configuration information regarding a single



RFC 2940                    COPS Client MIB                 October 2000


        COPS server from the point of view of a COPS client."
    INDEX { copsClientServerConfigAddrType,
            copsClientServerConfigAddress,
            copsClientServerConfigClientType,
            copsClientServerConfigAuthType }
    ::= { copsClientServerConfigTable 1 }

CopsClientServerConfigEntry ::=
    SEQUENCE {
        copsClientServerConfigAddrType      InetAddressType,
        copsClientServerConfigAddress       InetAddress,
        copsClientServerConfigClientType    INTEGER,
        copsClientServerConfigAuthType      CopsAuthType,
        copsClientServerConfigTcpPort       CopsTcpPort,
        copsClientServerConfigPriority      Integer32,
        copsClientServerConfigRowStatus     RowStatus
    }

copsClientServerConfigAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of address in copsClientServerConfigAddress."
    ::= { copsClientServerConfigEntry 1 }

copsClientServerConfigAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IPv4, IPv6 or DNS address of a COPS Server. Note that,
        since this is an index to the table, the DNS name must be
        short enough to fit into the maximum length of indices allowed
        by the management protocol in use."
    REFERENCE
        "RFC 2748 section 2.3"
    ::= { copsClientServerConfigEntry 2 }

copsClientServerConfigClientType OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The COPS protocol Client-Type for which this entry
        applies and for which this COPS server is capable
        of serving. Multiple Client-Types can be served by a
        single COPS server."



RFC 2940                    COPS Client MIB                 October 2000


    REFERENCE
        "RFC 2748 section 6, IANA"
    ::= { copsClientServerConfigEntry 3 }

copsClientServerConfigAuthType OBJECT-TYPE
    SYNTAX      CopsAuthType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of authentication mechanism for this COPS client
        to request when negotiating security at the start of a
        connection to a COPS server."
    REFERENCE
        "RFC 2748 section 4."
    ::= { copsClientServerConfigEntry 4 }


copsClientServerConfigTcpPort OBJECT-TYPE
    SYNTAX      CopsTcpPort
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The TCP port number on the COPS server to which the
        client should connect."
    ::= { copsClientServerConfigEntry 5 }

copsClientServerConfigPriority OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The priority of this entry relative to other entries.
        COPS client will attempt to contact COPS servers for the
        appropriate Client-Type. Higher numbers are tried first. The
        order to be used amongst server entries with the same priority
        is undefined. COPS servers that are notified to the client using
        the COPS protocol PDP-Redirect mechanism are always used in
        preference to any entries in this table."
    ::= { copsClientServerConfigEntry 6 }

copsClientServerConfigRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "State of this entry in the table."
    ::= { copsClientServerConfigEntry 7 }




RFC 2940                    COPS Client MIB                 October 2000


copsClientServerConfigRetryAlgrm OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    sequential(2),
                    roundRobin(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The algorithm by which the client should retry when it
         fails to connect to a COPS server."
    DEFVAL { sequential }
    ::= { copsClientConfigGroup 2 }

copsClientServerConfigRetryCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A retry count for use by the retry algorithm.  Each retry
         algorithm needs to specify how it uses this value.

         For the 'sequential(2)' algorithm, this value is the
         number of times the client should retry to connect
         to one COPS server before moving on to another.
         For the 'roundRobin(3)' algorithm, this value is not used."
    DEFVAL { 1 }
    ::= { copsClientConfigGroup 3 }

copsClientServerConfigRetryIntvl OBJECT-TYPE
    SYNTAX      TimeInterval
    UNITS       "centi-seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A retry interval for use by the retry algorithm.  Each retry
         algorithm needs to specify how it uses this value.

         For the 'sequential(2)' algorithm, this value is the time to
         wait between retries of a connection to the same COPS server.

         For the 'roundRobin(3)' algorithm, the client always attempts
         to connect to each Server in turn, until one succeeds or they
         all fail; if they all fail, then the client waits for the value
         of this interval before restarting the algorithm."
    DEFVAL { 1000 }
    ::= { copsClientConfigGroup 4 }




RFC 2940                    COPS Client MIB                 October 2000


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

copsClientConformance OBJECT IDENTIFIER ::= { copsClientMIB 2 }

copsClientGroups OBJECT IDENTIFIER ::= { copsClientConformance 1 }
copsClientCompliances OBJECT IDENTIFIER ::= { copsClientConformance 2 }

-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------

copsDeviceStatusGroup OBJECT-GROUP
    OBJECTS {
        copsClientCapabilities,
        copsClientServerTcpPort, copsClientServerType,
        copsClientServerAuthType, copsClientServerLastConnAttempt,
        copsClientState, copsClientServerKeepaliveTime,
        copsClientServerAccountingTime, copsClientInPkts,
        copsClientOutPkts, copsClientInErrs, copsClientLastError,
        copsClientTcpConnectAttempts, copsClientTcpConnectFailures,
        copsClientOpenAttempts, copsClientOpenFailures,
        copsClientErrUnsupportClienttype,
        copsClientErrUnsupportedVersion, copsClientErrLengthMismatch,
        copsClientErrUnknownOpcode, copsClientErrUnknownCnum,
        copsClientErrBadCtype, copsClientErrBadSends,
        copsClientErrWrongObjects, copsClientErrWrongOpcode,
        copsClientKaTimedoutClients, copsClientErrAuthFailures,
        copsClientErrAuthMissing
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects for monitoring the status of
        connections to COPS servers and statistics for a COPS client."
    ::= { copsClientGroups 1 }

copsDeviceConfigGroup OBJECT-GROUP
    OBJECTS {
        copsClientServerConfigTcpPort, copsClientServerConfigPriority,
        copsClientServerConfigRowStatus,
        copsClientServerConfigRetryAlgrm,
        copsClientServerConfigRetryCount,
        copsClientServerConfigRetryIntvl
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects for configuring COPS server



RFC 2940                    COPS Client MIB                 October 2000


        information."
    ::= { copsClientGroups 2 }

-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------

copsClientCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for device support of
        management of the COPS client."

    MODULE
        MANDATORY-GROUPS {
            copsDeviceStatusGroup, copsDeviceConfigGroup
        }

        OBJECT      copsClientServerConfigTcpPort
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."

        OBJECT      copsClientServerConfigPriority
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."

        OBJECT      copsClientServerConfigRowStatus
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."

        OBJECT      copsClientServerConfigRetryAlgrm
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."

        OBJECT      copsClientServerConfigRetryCount
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."




RFC 2940                    COPS Client MIB                 October 2000


        OBJECT      copsClientServerConfigRetryIntvl
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is required only if the device supports the
            configuration of COPS server information."

       ::= { copsClientCompliances 1 }

END

5.  Acknowledgments

   This document describes instrumentation for the client side of the
   COPS protocol which was defined by the RSVP Admission Policy (rap)
   Working Group, now known as the Resource Allocation Protocol (rap)
   Working Group.

6.  Security Considerations

   There are a number of management objects defined in this MIB that
   have a MAX-ACCESS clause of read-create.  Such objects may be
   considered sensitive or vulnerable in some network environments.  The
   support for SET operations in a non-secure environment without proper
   protection can have a negative effect on network operations.

   SNMPv1 by itself is not a secure environment.  Even if the network
   itself is secure (for example by using IPSec), even then, there is no
   control as to who on the secure network is allowed to access and
   GET/SET (read/change/create/delete) the objects in this MIB.

   It is recommended that the implementers consider the security
   features as provided by the SNMPv3 framework.  Specifically, the use
   of the User-based Security Model [USM] and the View-based Access
   Control Model [VACM] is recommended.

   It is then a customer/user responsibility to ensure that the SNMP
   entity giving access to an instance of this MIB, is properly
   configured to give access to the objects only to those principals
   (users) that have legitimate rights to indeed GET or SET
   (change/create/delete) them.











RFC 2940                    COPS Client MIB                 October 2000


7.  References

   [ARCH]        Harrington, D., Presuhn, R. and B. Wijnen, "An
                 Architecture for Describing SNMP Management
                 Frameworks", RFC 2571, April 1999.

   [V1PROTO]     Case, J., Fedor, M., Schoffstall, M. and J. Davin,
                 "Simple Network Management Protocol", STD 15, RFC 1157,
                 May 1990.

   [V1SMI]       Rose, M. and K. McCloghrie, "Structure and
                 Identification of Management Information for TCP/IP-
                 based Internets", STD 16, RFC 1155, May 1990.

   [V1CONCISE]   Rose, M. and K. McCloghrie, "Concise MIB Definitions",
                 STD 16, RFC 1212, March 1991.

   [V1TRAPS]     Rose, M., "A Convention for Defining Traps for use with
                 the SNMP", RFC 1215, March 1991.

   [V2SMI]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Structure of
                 Management Information Version 2 (SMIv2)", STD 58, RFC
                 2578, April 1999.

   [V2TC]        McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Textual Conventions
                 for SMIv2", STD 58, RFC 2579, April 1999.

   [V2CONFORM]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Conformance Statements
                 for SMIv2", STD 58, RFC 2580, April 1999.

   [V2COMMUNITY] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
                 "Introduction to Community-based SNMPv2", RFC 1901,
                 January 1996.

   [V2TRANS]     Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
                 "Transport Mappings for Version 2 of the Simple Network
                 Management Protocol (SNMPv2)", RFC 1906, January 1996.

   [V2PROTO]     Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
                 "Protocol Operations for Version 2 of the Simple
                 Network Management Protocol (SNMPv2)", RFC 1905,
                 January 1996.






RFC 2940                    COPS Client MIB                 October 2000


   [V3INTRO]     Case, J., Mundy, R., Partain, D. and B. Stewart,
                 "Introduction to Version 3 of the Internet-standard
                 Network Management Framework", RFC 2570, April 1999.

   [V3MPC]       Case, J., Harrington D., Presuhn R. and B. Wijnen,
                 "Message Processing and Dispatching for the Simple
                 Network Management Protocol (SNMP)", RFC 2572, April
                 1999.

   [V3USM]       Blumenthal, U. and B. Wijnen, "The User-Based Security
                 Model (USM) for Version 3 of the Simple Network
                 Management Protocol (SNMPv3)", RFC 2574, April 1999.

   [V3APPS]      Levi, D., Meyer, P. and B. Stewart, "SNMP
                 Applications", RFC 2573, April 1999.

   [V3VACM]      Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
                 Access Control Model for the Simple Network Management
                 Protocol (SNMP)", RFC 2575, April 1999.

   [MIB2]        McCloghrie K. and M. Rose, "Management Information Base
                 for Network Management of TCP/IP-based internets", STD
                 17, RFC 1213, March 1991.

   [FRAMEWORK]   Yavatkar, R., Pendarakis, D. and Guerin, R., "A
                 Framework for Policy-based Admission Control", RFC
                 2753, January 2000.

   [COPS]        Boyle, J., Cohen, R., Durham, D., Herzog, S., Rajan, R.
                 and A. Sastry, "The COPS (Common Open Policy Service)
                 Protocol", RFC 2748, January 2000.

   [RSVP]        Braden, R. ed., Zhang, L., Berson, S., Herzog, S. and
                 S.  Jamin, "Resource ReSerVation Protocol (RSVP)
                 Version 1 - Functional Specification", RFC 2205,
                 September 1997.

   [COPSRSVP]    Boyle, J., Cohen, R., Durham, D., Herzog, S., Rajan, R.
                 and A. Sastry, "COPS Usage for RSVP", RFC 2749, January
                 2000.

   [SRVLOC]      Guttman, E., Perkins, C., Veizades, J. and M. Day,
                 "Service Location Protocol, Version 2", RFC 2608, June
                 1999.

   [ADDRESSMIB]  Daniele, M., Haberman, B., Routhier, S. and J.
                 Schoenwaelder, "Textual Conventions for Internet
                 Network Addresses", RFC 2851, June 2000.



RFC 2940                    COPS Client MIB                 October 2000


   [PROCESS]     Bradner, S., "The Internet Standards Process --
                 Revision 3", BCP 9, RFC 2026, October 1996.

8.  Authors' Addresses

   Andrew Smith

   Fax:  +1 415 345 1827
   Email: ah_smith@pacbell.net


   David Partain
   Ericsson Radio Systems
   Research and Innovation
   P.O. Box 1248
   SE-581 12 Linkoping
   Sweden

   Phone: +46 13 28 41 44
   EMail: David.Partain@ericsson.com


   John Seligson
   Nortel Networks, Inc.
   4401 Great America Parkway
   Santa Clara, CA 95054
   USA

   Phone: +1 408 495 2992
   EMail: jseligso@nortelnetworks.com





















RFC 2940                    COPS Client MIB                 October 2000


9.  Notices

   The IETF takes no position regarding the validity or scope of any
   intellectual property or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; neither does it represent that it
   has made any effort to identify any such rights.  Information on the
   IETF's procedures with respect to rights in standards-track and
   standards-related documentation can be found in BCP-11.  Copies of
   claims of rights made available for publication and any assurances of
   licenses to be made available, or the result of an attempt made to
   obtain a general license or permission for the use of such
   proprietary rights by implementors or users of this specification can
   be obtained from the IETF Secretariat.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights which may cover technology that may be required to practice
   this standard.  Please address the information to the IETF Executive
   Director.






























RFC 2940                    COPS Client MIB                 October 2000


10.  Full Copyright Statement

   Copyright (C) The Internet Society (2000).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.