Rfc1761
TitleSnoop Version 2 Packet Capture File Format
AuthorB. Callaghan, R. Gilligan
DateFebruary 1995
Format:TXT, HTML
Status:INFORMATIONAL






Network Working Group                                       B. Callaghan
Request for Comments: 1761                                   R. Gilligan
Category: Informational                           Sun Microsystems, Inc.
                                                           February 1995


               Snoop Version 2 Packet Capture File Format

Status of this Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

Abstract

   This paper describes the file format used by "snoop", a packet
   monitoring and capture program developed by Sun.  This paper is
   provided so that people can write compatible programs to generate and
   interpret snoop packet capture files.

1.  Introduction

   The availability of tools to capture, display and interpret packets
   traversing a network has proven extremely useful in debugging
   networking problems.  The ability to capture packets and store them
   for later analysis allows one to de-couple the tasks of collecting
   information about a network problem and analysing that information.
   The "snoop" program, developed by Sun, has the ability to capture
   packets and store them in a file, and can interpret the packets
   stored in capture files.  This RFC describes the file format that the
   snoop program uses to store captured packets.  This paper was written
   so that others may write programs to interpret the capture files
   generated by snoop, or create capture files that can be interpreted
   by snoop.
















RFC 1761            Snoop Packet Capture File Format       February 1995


2.  File Format

   The snoop packet capture file is an array of octets structured as
   follows:

        +------------------------+
        |                        |
        |      File Header       |
        |                        |
        +------------------------+
        |                        |
        |     Packet Record      |
        ~        Number 1        ~
        |                        |
        +------------------------+
        .                        .
        .                        .
        .                        .
        +------------------------+
        |                        |
        |     Packet Record      |
        ~        Number N        ~
        |                        |
        +------------------------+

   The File Header is a fixed-length field containing general
   information about the packet file and the format of the packet
   records it contains.  One or more variable-length Packet Record
   fields follow the File Header field.  Each Packet Record field holds
   the data of one captured packet.

3. File Header

   The structure of the File Header is as follows:

    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    +                     Identification Pattern                    +
    |                                                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                       Version Number = 2                      |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                         Datalink Type                         |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+







RFC 1761            Snoop Packet Capture File Format       February 1995


        Identification Pattern:

                A 64-bit (8 octet) pattern used to identify the file as
                a snoop packet capture file.  The Identification Pattern
                consists of the 8 hexadecimal octets:

                        73 6E 6F 6F 70 00 00 00

                This is the ASCII string "snoop" followed by three null
                octets.

        Version Number:

                A 32-bit (4 octet) unsigned integer value representing
                the version of the packet capture file being used.  This
                document describes version number 2.  (Version number 1
                was used in early implementations and is now obsolete.)

        Datalink Type:

                A 32-bit (4 octet) field identifying the type of
                datalink header used in the packet records that follow.
                The datalink type codes are listed in the table below:

                Datalink Type           Code
                -------------           ----
                IEEE 802.3              0
                IEEE 802.4 Token Bus    1
                IEEE 802.5 Token Ring   2
                IEEE 802.6 Metro Net    3
                Ethernet                4
                HDLC                    5
                Character Synchronous   6
                IBM Channel-to-Channel  7
                FDDI                    8
                Other                   9
                Unassigned              10 - 4294967295

4. Packet Record Format

   Each packet record holds a partial or complete copy of one packet as
   well as some descriptive information about that packet.  The packet
   may be truncated in order to limit the amount of data to be stored in
   the packet file.  In addition, the packet record may be padded in
   order for it to align on a convenient machine-dependent boundary.
   Each packet record holds 24 octets of descriptive information about
   the packet, followed by the packet data, which is variable-length,
   and an optional pad field.  The descriptive information is structured



RFC 1761            Snoop Packet Capture File Format       February 1995


   as six 32-bit (4-octet) integer values.

   The structure of the packet record is as follows:

    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                        Original Length                        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                        Included Length                        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                      Packet Record Length                     |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                        Cumulative Drops                       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                       Timestamp Seconds                       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                     Timestamp Microseconds                    |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    .                                                               .
    .                          Packet Data                          .
    .                                                               .
    +                                               +- - - - - - - -+
    |                                               |     Pad       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

        Original Length

                32-bit unsigned integer representing the length in
                octets of the captured packet as received via a network.

        Included Length

                32-bit unsigned integer representing the length of the
                Packet Data field.  This is the number of octets of the
                captured packet that are included in this packet record.
                If the received packet was truncated, the Included
                Length field will be less than the Original Length
                field.

        Packet Record Length

                32-bit unsigned integer representing the total length of
                this packet record in octets.  This includes the 24
                octets of descriptive information, the length of the
                Packet Data field, and the length of the Pad field.






RFC 1761            Snoop Packet Capture File Format       February 1995


        Cumulative Drops

                32-bit unsigned integer representing the number of
                packets that were lost by the system that created the
                packet file between the first packet record in the
                file and this one.  Packets may be lost because of
                insufficient resources in the capturing system, or for
                other reasons.  Note: some implementations lack the
                ability to count dropped packets.  Those
                implementations may set the cumulative drops value to
                zero.

        Timestamp Seconds

                32-bit unsigned integer representing the time, in
                seconds since January 1, 1970, when the packet arrived.

        Timestamp Microseconds

                32-bit unsigned integer representing microsecond
                resolution of packet arrival time.

        Packet Data

                Variable-length field holding the packet that was
                captured, beginning with its datalink header.  The
                Datalink Type field of the file header can be used to
                determine how to decode the datalink header.  The length
                of the Packet Data field is given in the Included Length
                field.

        Pad

                Variable-length field holding zero or more octets that
                pads the packet record out to a convenient boundary.

5.  Data Format

   All integer values are stored in "big-endian" order, with the high-
   order bits first.

6.  Security Considerations

   Security issues are not discussed in this memo.







RFC 1761            Snoop Packet Capture File Format       February 1995


Authors' Addresses

   Brent Callaghan
   Sun Microsystems, Inc.
   2550 Garcia Avenue
   Mailstop UMTV05-44
   Mountain View, CA 94043-1100

   Phone: 1-415-336-1051
   EMail: brent.callaghan@eng.sun.com


   Robert E. Gilligan
   Sun Microsystems, Inc.
   2550 Garcia Avenue
   Mailstop UMTV05-44
   Mountain View, CA 94043-1100

   Phone: 1-415-336-1012
   EMail: bob.gilligan@eng.sun.com