Rfc4146
TitleSimple New Mail Notification
AuthorR. Gellens
DateAugust 2005
Format:TXT, HTML
Status:INFORMATIONAL






Network Working Group                                         R. Gellens
Request for Comments: 4146                                      QUALCOMM
Category: Informational                                      August 2005


                      Simple New Mail Notification

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This memo documents a long-standing technique, supported by a large
   number of mail servers, which allows users to be notified of new
   mail.  In addition to server support, there are a number of clients
   that support this, ranging from full email clients to specialized
   clients whose only purpose is to receive new mail notifications and
   alert a mail client.

   In brief, the server sends the string "nm_notifyuser" CRLF to the
   finger port on the IP address (either configured or last used) of the
   user who has received new mail.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  Conventions Used in this Document . . . . . . . . . . . . . . 2
   3.  Simple Mail Notification . . . . . . . . . . . . . . . . . .  2
   4.  Example . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   5.  Security Considerations  . . . . . . . . . . . . . . . . . .  3
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . 3
   7.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . .  3












RFC 4146              Simple New Mail Notification           August 2005


1.  Introduction

   There is a long-standing technique supported by a large number of
   mail servers that allows users to be notified of new mail.  In
   addition to server support, there are a number of clients that
   support this, ranging from full email clients to specialized clients
   whose only purpose is to receive new mail notifications and alert a
   mail client.  This technique is sometimes known as "notify mail"
   (after a shareware client of the same name), "biff", and the "finger
   hack".

2.  Conventions Used in This Document

   In examples, "C:" indicates lines sent by the client, and "S:"
   indicates those sent by the server.  Line breaks within a command
   example are for editorial purposes only.  Line breaks in the protocol
   are indicated by "CRLF".

3.  Simple Mail Notification

   With this technique, the server sends the string "nm_notifyuser"
   immediately followed by CRLF to the finger port on the IP address for
   the user who has received new mail.  The finger port is 79.  Note
   that only the port for finger is used; the finger protocol itself is
   not used.

   The IP address to use may be configured, or the server may use the IP
   address that was last used to check mail by the user.  Typically,
   this is a per-account configuration option.

   On the client system, a process must be listening to the finger port
   to be useful.  When it receives the "nm_notifyuser" string, it takes
   a configured action, typically instructing a mail client to fetch
   mail.

   Normally, a TCP connection to the target computer is opened, the
   "nm_notifyuser" string is sent, and the connection is closed without
   waiting for a response.

   In some cases, UDP is used instead of TCP, but the default and
   general practice is TCP.  Even though only a single message in one
   direction is sent (with no reply), TCP is used most often, probably
   for reliability.

   There is an assumption that the client listening on an IP address
   only has responsibility for one email account.  If a client can check
   multiple accounts and receives the "nm_notifyuser" string, it does
   not know which account received the mail.



RFC 4146              Simple New Mail Notification           August 2005


   There is a requirement that a finger daemon not be active on the
   client.

4.  Example

   This example assumes that new mail has arrived at the server
   mail.isp.example.com for account fastness@example.net.  The server
   has determined an IP address to which notification should be sent.

      C: <listens on TCP port 79>
      S: <opens TCP connection to IP address port 79>
      C: <accepts inbound connection on port 79>
      S: nm_notifyuserCRLF
      S: <closes TCP connection>

5.  Security Considerations

   There is no assurance that the "nm_notifyuser" message is being sent
   to the correct IP address.  Nor does the listening agent on the
   client system have any assurance that an "nm_notifyuser" string was
   sent by a mail server that has received new mail for the user.

   It is trivial for an attacker to send large numbers of
   "nm_notifyuser" messages to a targeted system.  Client systems that
   are listening for this message SHOULD implement protections against
   being flooded with notifications.  Many server systems already
   implement protections against users logging in and checking mail too
   frequently.

   Because use of this protocol requires that a port be open with an
   agent listening on it, if that agent contains vulnerabilities, it may
   create a remotely exploitable attack (for example, buffer overflows
   that permit an attacker to execute arbitrary code on the client
   system with the permissions of the agent).  As usual, with a process
   listening on a port, the process should execute with the least
   possible privilege level and access.

6.  IANA Considerations

   The notify mail hack (and this document) should be included as an
   additional usage for port 79.

7.  Acknowledgments

   The NotifyMail shareware utility was written by Scott Gruby.






RFC 4146              Simple New Mail Notification           August 2005


Author's Address

   Randall Gellens
   QUALCOMM Incorporated
   6455 Lusk Blvd.
   San Diego, CA  92121-2779
   USA
   EMail: randy@qualcomm.com











































RFC 4146              Simple New Mail Notification           August 2005


Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.