Rfc6895
TitleDomain Name System (DNS) IANA Considerations
AuthorD. Eastlake 3rd
DateApril 2013
Format:TXT, HTML
ObsoletesRFC6195
UpdatesRFC1183, RFC2845, RFC2930, RFC3597
AlsoBCP0042
Status:BEST CURRENT PRACTICE






Internet Engineering Task Force (IETF)                   D. Eastlake 3rd
Request for Comments: 6895                                        Huawei
BCP: 42                                                       April 2013
Obsoletes: 6195
Updates: 1183, 2845, 2930, 3597
Category: Best Current Practice
ISSN: 2070-1721


              Domain Name System (DNS) IANA Considerations

Abstract

   This document specifies Internet Assigned Numbers Authority (IANA)
   parameter assignment considerations for the allocation of Domain Name
   System (DNS) resource record types, CLASSes, operation codes, error
   codes, DNS protocol message header bits, and AFSDB resource record
   subtypes.  It obsoletes RFC 6195 and updates RFCs 1183, 2845, 2930,
   and 3597.

Status of This Memo

   This memo documents an Internet Best Current Practice.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   BCPs is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc6895.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.



RFC 6895                 DNS IANA Considerations              April 2013


Table of Contents

   1. Introduction ....................................................2
      1.1. Terminology ................................................3
   2. DNS Query/Response Headers ......................................3
      2.1. One Spare Bit? .............................................4
      2.2. OpCode Assignment ..........................................4
      2.3. RCODE Assignment ...........................................4
   3. DNS Resource Records ............................................6
      3.1. RRTYPE IANA Considerations .................................7
           3.1.1. DNS RRTYPE Allocation Policy ........................8
           3.1.2. DNS RRTYPE Expert Guidelines .......................10
           3.1.3. Special Note on the OPT RR .........................10
           3.1.4. The AFSDB RR Subtype Field .........................10
      3.2. RR CLASS IANA Considerations ..............................11
      3.3. Label Considerations ......................................13
           3.3.1. Label Types ........................................13
           3.3.2. Label Contents and Use .............................13
   4. Security Considerations ........................................14
   5. IANA Considerations ............................................14
   Appendix A. RRTYPE Allocation Template ............................15
   Appendix B. Changes from RFC 6195 .................................16
   Normative References ..............................................17
   Informative References ............................................18
   Acknowledgements ..................................................19

1.  Introduction

   The Domain Name System (DNS) provides replicated distributed secure
   hierarchical databases that store "resource records" (RRs) under
   domain names.  DNS data is structured into CLASSes and zones that can
   be independently maintained.  Familiarity with [RFC1034], [RFC1035],
   [RFC2136], [RFC2181], and [RFC4033] is assumed.

   This document provides, either directly or by reference, the general
   IANA parameter assignment considerations that apply across DNS query
   and response headers and all RRs.  There may be additional IANA
   considerations that apply to only a particular RRTYPE or
   query/response OpCode.  See the specific RFC defining that RRTYPE or
   query/response OpCode for such considerations if they have been
   defined, except for AFSDB RR considerations [RFC1183], which are
   included herein.  This RFC obsoletes [RFC6195]; however, the only
   significant changes are those to the RRTYPE IANA allocation process,
   aimed at streamlining it and clarifying the expected behavior of the
   parties involved, and the closing of the AFSDB subtype registry.

   IANA currently maintains a web page of DNS parameters available from
   <http://www.iana.org>.



RFC 6895                 DNS IANA Considerations              April 2013


1.1.  Terminology

   "Standards Action", "IETF Review", "Specification Required", and
   "Private Use" are as defined in [RFC5226].

2.  DNS Query/Response Headers

   The header for DNS queries and responses contains field/bits in the
   following diagram taken from [RFC2136]:

                                            1  1  1  1  1  1
              0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |                      ID                       |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |QR|   OpCode  |AA|TC|RD|RA| Z|AD|CD|   RCODE   |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |                QDCOUNT/ZOCOUNT                |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |                ANCOUNT/PRCOUNT                |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |                NSCOUNT/UPCOUNT                |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
             |                    ARCOUNT                    |
             +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

   The ID field identifies the query and is echoed in the response so
   they can be matched.

   The QR bit indicates whether the header is for a query or a response.

   The AA, TC, RD, RA, and CD bits are each theoretically meaningful
   only in queries or only in responses, depending on the bit.  The AD
   bit was only meaningful in responses but is expected to have a
   separate but related meaning in queries (see Section 5.7 of
   [RFC6840]).  Only the RD and CD bits are expected to be copied from
   the query to the response; however, some DNS implementations copy all
   the query header as the initial value of the response header.  Thus,
   any attempt to use a "query" bit with a different meaning in a
   response or to define a query meaning for a "response" bit may be
   dangerous, given the existing implementation.  Meanings for these
   bits may only be assigned by a Standards Action.

   The unsigned integer fields query count (QDCOUNT), answer count
   (ANCOUNT), authority count (NSCOUNT), and additional information
   count (ARCOUNT) express the number of records in each section for all
   OpCodes except Update [RFC2136].  These fields have the same




RFC 6895                 DNS IANA Considerations              April 2013


   structure and data type for Update but are instead the counts for the
   zone (ZOCOUNT), prerequisite (PRCOUNT), update (UPCOUNT), and
   additional information (ARCOUNT) sections.

2.1.  One Spare Bit?

   There have been ancient DNS implementations for which the Z bit being
   on in a query meant that only a response from the primary server for
   a zone is acceptable.  It is believed that current DNS
   implementations ignore this bit.

   Assigning a meaning to the Z bit requires a Standards Action.

2.2.  OpCode Assignment

   Currently, DNS OpCodes are assigned as follows:

        OpCode Name                                Reference

         0     Query                               [RFC1035]
         1     IQuery (Inverse Query, OBSOLETE)    [RFC3425]
         2     Status                              [RFC1035]
         3     Unassigned
         4     Notify                              [RFC1996]
         5     Update                              [RFC2136]
        6-15   Unassigned

   Although the Status OpCode is reserved in [RFC1035], its behavior has
   not been specified.  New OpCode assignments require a Standards
   Action with early allocation permitted as specified in [RFC4020].

2.3.  RCODE Assignment

   It would appear from the DNS header above that only four bits of
   RCODE, or response/error code, are available.  However, RCODEs can
   appear not only at the top level of a DNS response but also inside
   TSIG RRs [RFC2845], TKEY RRs [RFC2930], and extended by OPT RRs
   [RFC6891].  The OPT RR provides an 8-bit extension to the 4 header
   bits, resulting in a 12-bit RCODE field, and the TSIG and TKEY RRs
   have a 16-bit field designated in their RFCs as the "Error" field.

   Error codes appearing in the DNS header and in these other RR types
   all refer to the same error code space with the exception of error
   code 16, which has a different meaning in the OPT RR than in the TSIG
   RR, and error code 9, whose variations are described after the table
   below.  The duplicate assignment of 16 was accidental.  To the extent
   that any prior RFCs imply any sort of different error number space
   for the OPT, TSIG, or TKEY RRs, they are superseded by this unified



RFC 6895                 DNS IANA Considerations              April 2013


   DNS error number space.  (This paragraph is the reason this document
   updates [RFC2845] and [RFC2930].)  With the existing exceptions of
   error numbers 9 and 16, the same error number must not be assigned
   for different errors even if they would only occur in different RR
   types.  See table below.

          RCODE   Name    Description                        Reference
          Decimal
            Hexadecimal

           0    NoError   No Error                           [RFC1035]
           1    FormErr   Format Error                       [RFC1035]
           2    ServFail  Server Failure                     [RFC1035]
           3    NXDomain  Non-Existent Domain                [RFC1035]
           4    NotImp    Not Implemented                    [RFC1035]
           5    Refused   Query Refused                      [RFC1035]
           6    YXDomain  Name Exists when it should not     [RFC2136]
           7    YXRRSet   RR Set Exists when it should not   [RFC2136]
           8    NXRRSet   RR Set that should exist does not  [RFC2136]
           9    NotAuth   Server Not Authoritative for zone  [RFC2136]
           9    NotAuth   Not Authorized                     [RFC2845]
          10    NotZone   Name not contained in zone         [RFC2136]

          11 - 15
         0xB - 0xF        Unassigned

          16    BADVERS   Bad OPT Version                    [RFC6891]
          16    BADSIG    TSIG Signature Failure             [RFC2845]
          17    BADKEY    Key not recognized                 [RFC2845]
          18    BADTIME   Signature out of time window       [RFC2845]
          19    BADMODE   Bad TKEY Mode                      [RFC2930]
          20    BADNAME   Duplicate key name                 [RFC2930]
          21    BADALG    Algorithm not supported            [RFC2930]
          22    BADTRUNC  Bad Truncation                     [RFC4635]

          23 - 3,840
      0x0017 - 0x0F00     Unassigned

       3,841 - 4,095
      0x0F01 - 0x0FFF     Reserved for Private Use

       4,096 - 65,534
      0x1000 - 0xFFFE     Unassigned

      65,535
      0xFFFF              Reserved; can only be allocated by Standards
                          Action.




RFC 6895                 DNS IANA Considerations              April 2013


      Note on error number 9 (NotAuth): This error number means either
      "Not Authoritative" [RFC2136] or "Not Authorized" [RFC2845].  If 9
      appears as the RCODE in the header of a DNS response without a
      TSIG RR or with a TSIG RR having a zero error field, then it means
      "Not Authoritative".  If 9 appears as the RCODE in the header of a
      DNS response that includes a TSIG RR with a non-zero error field,
      then it means "Not Authorized".

   Since it is important that RCODEs be understood for interoperability,
   assignment of a new RCODE in the ranges listed above as "Unassigned"
   requires an IETF Review.

3.  DNS Resource Records

   All RRs have the same top-level format, shown in the figure below
   taken from [RFC1035].

                                          1  1  1  1  1  1
            0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
          |                                               |
          /                                               /
          /                     NAME                      /
          /                                               /
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
          |                     TYPE                      |
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
          |                     CLASS                     |
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
          |                     TTL                       |
          |                                               |
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
          |                   RDLENGTH                    |
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--|
          /                    RDATA                      /
          /                                               /
          +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

   NAME is an owner name, i.e., the name of the node to which this
   resource record pertains.  NAMEs are specific to a CLASS as described
   in Section 3.2.  NAMEs consist of an ordered sequence of one or more
   labels, each of which has a label type [RFC1035] [RFC6891].

   TYPE is a 2-octet unsigned integer containing one of the RRTYPE
   codes.  See Section 3.1.

   CLASS is a 2-octet unsigned integer containing one of the RR CLASS
   codes.  See Section 3.2.



RFC 6895                 DNS IANA Considerations              April 2013


   TTL is a 4-octet (32-bit) unsigned integer that specifies, for data
   TYPEs, the number of seconds that the resource record may be cached
   before the source of the information should again be consulted.  Zero
   is interpreted to mean that the RR can only be used for the
   transaction in progress.

   RDLENGTH is an unsigned 16-bit integer that specifies the length in
   octets of the RDATA field.

   RDATA is a variable-length string of octets that constitutes the
   resource.  The format of this information varies according to the
   TYPE and, in some cases, the CLASS of the resource record.

3.1.  RRTYPE IANA Considerations

   There are three subcategories of RRTYPE numbers: data TYPEs, QTYPEs,
   and Meta-TYPEs.

   Data TYPEs are the means of storing data.  QTYPES can only be used in
   queries.  Meta-TYPEs designate transient data associated with a
   particular DNS message and, in some cases, can also be used in
   queries.  Thus far, data TYPEs have been assigned from 1 upward, plus
   the block from 100 through 103, and from 32,768 upward, while Q and
   Meta-TYPEs have been assigned from 255 downward except for the OPT
   Meta-RR, which is assigned TYPE 41.  There have been DNS
   implementations that made caching decisions based on the top bit of
   the bottom byte of the RRTYPE.

   There are currently three Meta-TYPEs assigned: OPT [RFC6891], TSIG
   [RFC2845], and TKEY [RFC2930].  There are currently five QTYPEs
   assigned: * (ALL/ANY), MAILA, MAILB, AXFR, and IXFR.

   Allocated RRTYPEs have mnemonics that must be completely disjoint
   from the mnemonics used for CLASSes and that must match the regular
   expression below.  In addition, the generic CLASS and RRTYPE names
   specified in Section 5 of [RFC3597] cannot be assigned as new RRTYPE
   mnemonics.

                         [A-Z][A-Z0-9\-]*[A-Z0-9]
                                  but not
                            (TYPE|CLASS)[0-9]*










RFC 6895                 DNS IANA Considerations              April 2013


   Considerations for the allocation of new RRTYPEs are as follows:

      Decimal
    Hexadecimal       Assignment Policy

         0
    0x0000            RRTYPE zero is used as a special indicator for the
                      SIG(0) RR [RFC2931] [RFC4034] and in other
                      circumstances and must never be allocated for
                      ordinary use.

         1 - 127
    0x0001 - 0x007F   Remaining RRTYPEs in this range are assigned for
                      data TYPEs by the DNS RRTYPE Allocation Policy as
                      specified in Section 3.1.1.

         128 - 255
    0x0080 - 0x00FF   Remaining RRTYPEs in this range are assigned for Q
                      and Meta-TYPEs by the DNS RRTYPE Allocation Policy
                      as specified in Section 3.1.1.

       256 - 61,439
    0x0100 - 0xEFFF   Remaining RRTYPEs in this range are assigned for
                      data RRTYPEs by the DNS RRTYPE Allocation Policy
                      as specified in Section 3.1.1.  (32,768 and 32,769
                      (0x8000 and 0x8001) have been assigned.)

    61,440 - 65,279
    0xF000 - 0xFEFF   Reserved for future use.  IETF Review required to
                      define use.

    65,280 - 65,534
    0xFF00 - 0xFFFE   Reserved for Private Use.

    65,535
    0xFFFF            Reserved (Standards Action)

3.1.1.  DNS RRTYPE Allocation Policy

   Parameter values specified in Section 3.1 above, as assigned based on
   DNS RRTYPE Allocation Policy, are allocated by Expert Review if they
   meet the two requirements listed below.  There will be a pool of a
   small number of Experts appointed by the IESG.  Each application will
   be judged by an Expert selected by IANA.  In any case where the
   selected Expert is unavailable or states they have a conflict of
   interest, IANA may select another Expert from the pool.  Some
   guidelines for the Experts are given in Section 3.1.2.




RFC 6895                 DNS IANA Considerations              April 2013


   RRTYPEs that do not meet the requirements below may nonetheless be
   allocated by a Standards Action with early allocation permitted as
   specified in [RFC4020].

   1. A complete template as specified in Appendix A has been posted to
      the dns-rrtype-applications@ietf.org mailing list and received by
      the Expert.

      Note that the posting of partially completed, draft, or formally
      submitted templates to dnsext@ietf.org by the applicant or Expert
      for comment and discussion is highly encouraged.  Before formal
      submission of an RRTYPE template, we recommend submitting it for
      community review and considering the responses in order to reduce
      the probability of initial rejection and the need for modification
      and resubmission.

   2. The RR for which an RRTYPE code is being requested is either (a) a
      data TYPE that can be handled as an Unknown RR as described in
      [RFC3597] or (b) a Meta-TYPE whose processing is optional, i.e.,
      it is safe to simply discard RRs with that Meta-TYPE in queries or
      responses.

      Note that such RRs may include additional section processing,
      provided such processing is optional.

   After the applicant submits their formal application to IANA by
   sending the completed template specified in Appendix A to the
   dns-rrtype-applications@ietf.org mailing list, IANA appoints an
   Expert and sends the completed template to the Expert, copying the
   applicant.  No more than two weeks after receiving the application,
   the Expert shall explicitly approve or reject the application,
   informing IANA, the applicant, and the dnsext@ietf.org mailing list.
   A rejection should include the reason for rejection and may include
   suggestions for improvement.  The Expert should consult with other
   technical experts and the dnsext@ietf.org mailing list as necessary.
   If the Expert does not approve the application within this period, it
   is considered rejected.  IANA should report non-responsive Experts to
   the IESG.

   IANA shall maintain a public archive of approved templates.  In
   addition, if the required description of the RRTYPE applied for is
   referenced by URL, a copy of the document so referenced should be
   included in the archive.








RFC 6895                 DNS IANA Considerations              April 2013


3.1.2.  DNS RRTYPE Expert Guidelines

   The Designated Expert should normally be lenient, preferring to
   approve most requests.  However, the Expert should usually reject any
   RRTYPE allocation request that meets one or more of the following
   criteria:

   1. The request was documented in a manner that was not sufficiently
      clear or complete to evaluate or implement.  (Additional
      documentation can be provided during the Expert Review period.)

   2. The proposed RRTYPE or RRTYPEs affect DNS processing and do not
      meet the criteria in point 2 of Section 3.1.1 above.

   3. Application use as documented makes incorrect assumptions about
      DNS protocol behavior, such as wildcards, CNAME, DNAME, etc.

   4. An excessive number of RRTYPE values is being requested when the
      purpose could be met with a smaller number of values or with
      Private Use values.

3.1.3.  Special Note on the OPT RR

   The OPT (OPTion) RR (RRTYPE 41) and its IANA considerations are
   specified in [RFC6891].  Its primary purpose is to extend the
   effective field size of various DNS fields, including RCODE, label
   type, OpCode, flag bits, and RDATA size.  In particular, for
   resolvers and servers that recognize it, it extends the RCODE field
   from 4 to 12 bits.

3.1.4.  The AFSDB RR Subtype Field

   The AFSDB RR [RFC1183] is a CLASS-insensitive RR that has the same
   RDATA field structure as the MX RR [RFC1035], but the 16-bit unsigned
   integer field at the beginning of the RDATA is interpreted as a
   subtype as shown below.  Use of the AFSDB RR to locate AFS cell
   database servers was deprecated by [RFC5864].  This subtype registry
   is hereby closed, and allocation of new subtypes is no longer
   permitted.












RFC 6895                 DNS IANA Considerations              April 2013


      Decimal
    Hexadecimal       Assignment Policy

         0
    0x0000            Reserved; registry closed

         1
    0x0001            AFS v3.0 Location Service [RFC1183]

         2
    0x0002            DCE/NCA root cell directory node [RFC1183]

         3 - 65,279
    0x0003 - 0xFEFF   Not allocated; registry closed

    65,280 - 65,534
    0xFF00 - 0xFFFE   Private Use

    65,535
    0xFFFF            Reserved; registry closed

3.2.  RR CLASS IANA Considerations

   There are currently two subcategories of DNS CLASSes: normal, data-
   containing classes; and QCLASSes that are only meaningful in queries
   or updates.

   DNS CLASSes have been little used but constitute another dimension of
   the DNS distributed database.  In particular, there is no necessary
   relationship between the namespace or root servers for one data CLASS
   and those for another data CLASS.  The same DNS NAME can have
   completely different meanings in different CLASSes.  The label types
   are the same, and the null label is usable only as root in every
   CLASS.  As global networking and DNS have evolved, the IN, or
   Internet, CLASS has dominated DNS use.

   As yet, there has not been a requirement for "Meta-CLASSes".  That
   would be a CLASS to designate transient data associated with a
   particular DNS message, which might be usable in queries.  However,
   it is possible that there might be a future requirement for one or
   more "Meta-CLASSes".

   Assigned CLASSes have mnemonics that must be completely disjoint from
   the mnemonics used for RRTYPEs and that must match the regular
   expression below.  In addition, the generic CLASS and RRTYPE names
   specified in Section 5 of [RFC3597] cannot be assigned as new CLASS
   mnemonics.




RFC 6895                 DNS IANA Considerations              April 2013


                         [A-Z][A-Z0-9\-]*[A-Z0-9]
                                  but not
                           (CLASS|TYPE)[0-9]*

   The current CLASS assignments and considerations for future
   assignments are as follows:

      Decimal
    Hexadecimal       Assignment / Policy, Reference

         0
    0x0000            Reserved; assignment requires a Standards Action.

         1
    0x0001            Internet (IN) [RFC1035]

         2
    0x0002            Available for assignment by IETF Review as a data
                      CLASS.

         3
    0x0003            Chaos (CH) [Moon1981]

         4
    0x0004            Hesiod (HS) [Dyer1987]

         5 - 127
    0x0005 - 0x007F   Available for assignment by IETF Review for data
                      CLASSes only.

       128 - 253
    0x0080 - 0x00FD   Available for assignment by IETF Review for
                      QCLASSes and Meta-CLASSes only.

       254
    0x00FE            QCLASS NONE [RFC2136]

       255
    0x00FF            QCLASS * (ANY) [RFC1035]

       256 - 32,767
    0x0100 - 0x7FFF   Available for assignment by IETF Review.

    32,768 - 57,343
    0x8000 - 0xDFFF   Available for assignment to data CLASSes only;
                      Specification Required.





RFC 6895                 DNS IANA Considerations              April 2013


    57,344 - 65,279
    0xE000 - 0xFEFF   Available for assignment to QCLASSes and
                      Meta-CLASSes only; Specification Required.

    65,280 - 65,534
    0xFF00 - 0xFFFE   Private Use

    65,535
    0xFFFF            Reserved; can only be assigned by a Standards
                      Action.

3.3.  Label Considerations

   DNS NAMEs are sequences of labels [RFC1035].

3.3.1.  Label Types

   At the present time, there are two categories of label types: data
   labels and compression labels.  Compression labels are pointers to
   data labels elsewhere within an RR or DNS message and are intended to
   shorten the wire encoding of NAMEs.

   The two existing data label types are sometimes referred to as Text
   and Binary.  Text labels can, in fact, include any octet value
   including zero-value octets, but many current uses involve only
   printing ASCII characters [US-ASCII].  For retrieval, Text labels are
   defined to treat ASCII uppercase and lowercase letter codes as
   matching [RFC4343].  Binary labels are bit sequences [RFC2673].  The
   Binary Label type is Historic [RFC6891].

3.3.2.  Label Contents and Use

   The last label in each NAME is "ROOT", which is the zero-length
   label.  By definition, the null or ROOT label cannot be used for any
   other NAME purpose.

   NAMEs are local to a CLASS.  The Hesiod [Dyer1987] and Chaos
   [Moon1981] CLASSes are for essentially local use.  The IN, or
   Internet, CLASS is thus the only DNS CLASS in global use on the
   Internet at this time.

   A somewhat out-of-date description of name allocation in the IN CLASS
   is given in [RFC1591].  Some information on reserved top-level domain
   names is in BCP 32 [RFC2606].







RFC 6895                 DNS IANA Considerations              April 2013


4.  Security Considerations

   This document addresses IANA considerations in the allocation of
   general DNS parameters, not security.  See [RFC4033], [RFC4034], and
   [RFC4035] for secure DNS considerations.

5.  IANA Considerations

   This document consists entirely of DNS IANA considerations.

   IANA has established a process for accepting Appendix A templates and
   selecting an Expert from those appointed to review such template form
   applications.  IANA forwards the template to the Expert, copying the
   applicant.  IANA archives and makes available all approved RRTYPE
   allocation templates and referred documentation (unless it is readily
   available at a stable URI).  It is the duty of the applicant to post
   the formal application template to the
   dns-rrtype-applications@ietf.org mailing list, which IANA will
   monitor.  The dnsext@ietf.org mailing list is for community
   discussion and comment.  See Section 3.1 and Appendix A for more
   details.






























RFC 6895                 DNS IANA Considerations              April 2013


Appendix A.  RRTYPE Allocation Template

                 DNS RRTYPE PARAMETER ALLOCATION TEMPLATE

   When ready for formal consideration, this template is to be submitted
   to IANA for processing by emailing the template to dns-rrtype-
   applications@ietf.org.

   A. Submission Date:

   B.1 Submission Type:  [ ] New RRTYPE  [ ] Modification to RRTYPE
   B.2 Kind of RR:  [ ] Data RR  [ ] Meta-RR

   C. Contact Information for submitter (will be publicly posted):
      Name:                            Email Address:
      International telephone number:
      Other contact handles:

   D. Motivation for the new RRTYPE application.
      Please keep this part at a high level to inform the Expert and
      reviewers about uses of the RRTYPE.  Most reviewers will be DNS
      experts that may have limited knowledge of your application space.

   E. Description of the proposed RR type.
      This description can be provided in-line in the template, as an
      attachment, or with a publicly available URL.

   F. What existing RRTYPE or RRTYPEs come closest to filling that need
      and why are they unsatisfactory?

   G. What mnemonic is requested for the new RRTYPE (optional)?

      Note: If a mnemonic is not supplied, not allowed, or duplicates an
      existing RRTYPE or CLASS mnemonic, the Expert will assign a
      mnemonic.

   H. Does the requested RRTYPE make use of any existing IANA registry
      or require the creation of a new IANA subregistry in DNS
      Parameters?  If so, please indicate which registry is to be used
      or created.  If a new subregistry is needed, specify the
      allocation policy for it and its initial contents.  Also include
      what the modification procedures will be.

   I. Does the proposal require/expect any changes in DNS
      servers/resolvers that prevent the new type from being processed
      as an unknown RRTYPE (see [RFC3597])?

   J. Comments:



RFC 6895                 DNS IANA Considerations              April 2013


Appendix B.  Changes from RFC 6195

   Dropped description of changes from RFC 5395 to [RFC6195], since
   those changes have already happened and we don't need to do them
   again.  Added description of changes from [RFC6195] to this document.

   Cut back RRTYPE Expert Review period to two weeks and eliminated the
   mandatory dnsext@ietf.org comment period.  Changed workflow
   description for RRTYPE review and allocation to correspond more
   closely to actual practice.

   Closed the AFSDB subtype registry and added an informative reference
   to [RFC5864] where the use of the AFSDB RR to locate AFS cell
   database servers is deprecated.

   Clarified IANA archiving of referenced documentation as well as
   approved RRTYPE application template.

   In the RRTYPE application template, changed the label of question "B"
   to "B.1" and added "B.2" to ask about the kind of RR.

   Added text and an exclusory regular expression to Sections 3.1 and
   3.2 to prohibit the use of a slight generalization of the generic
   CLASS and RRTYPE names specified in [RFC3597] as the mnemonics for
   new CLASSes and RRTYPEs.

   Parenthetically listed "ANY" as well as "ALL" as a meaning for the
   "*" RRTYPE.

   Clarified that there is one DNS error number space for headers, OPT
   extended headers, TSIG RRs, and TKEY RRs.  Noted that this is
   considered to update [RFC2845] and [RFC2930].  Noted the overloading
   of error number 9 as well as 16.

   Updated references for revised versions.

   Incorporated a number of editorial changes and typo fixes.














RFC 6895                 DNS IANA Considerations              April 2013


Normative References

   [RFC1034]   Mockapetris, P., "Domain names - concepts and
               facilities", STD 13, RFC 1034, November 1987.

   [RFC1035]   Mockapetris, P., "Domain names - implementation and
               specification", STD 13, RFC 1035, November 1987.

   [RFC1996]   Vixie, P., "A Mechanism for Prompt Notification of Zone
               Changes (DNS NOTIFY)", RFC 1996, August 1996.

   [RFC2136]   Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound,
               "Dynamic Updates in the Domain Name System (DNS UPDATE)",
               RFC 2136, April 1997.

   [RFC2181]   Elz, R. and R. Bush, "Clarifications to the DNS
               Specification", RFC 2181, July 1997.

   [RFC2845]   Vixie, P., Gudmundsson, O., Eastlake 3rd, D., and B.
               Wellington, "Secret Key Transaction Authentication for
               DNS (TSIG)", RFC 2845, May 2000.

   [RFC2930]   Eastlake 3rd, D., "Secret Key Establishment for DNS (TKEY
               RR)", RFC 2930, September 2000.

   [RFC3425]   Lawrence, D., "Obsoleting IQUERY", RFC 3425,
               November 2002.

   [RFC3597]   Gustafsson, A., "Handling of Unknown DNS Resource Record
               (RR) Types", RFC 3597, September 2003.

   [RFC4020]   Kompella, K. and A. Zinin, "Early IANA Allocation of
               Standards Track Code Points", BCP 100, RFC 4020,
               February 2005.

   [RFC4033]   Arends, R., Austein, R., Larson, M., Massey, D., and S.
               Rose, "DNS Security Introduction and Requirements",
               RFC 4033, March 2005.

   [RFC4034]   Arends, R., Austein, R., Larson, M., Massey, D., and S.
               Rose, "Resource Records for the DNS Security Extensions",
               RFC 4034, March 2005.

   [RFC4035]   Arends, R., Austein, R., Larson, M., Massey, D., and S.
               Rose, "Protocol Modifications for the DNS Security
               Extensions", RFC 4035, March 2005.





RFC 6895                 DNS IANA Considerations              April 2013


   [RFC4635]   Eastlake 3rd, D., "HMAC SHA (Hashed Message
               Authentication Code, Secure Hash Algorithm) TSIG
               Algorithm Identifiers", RFC 4635, August 2006.

   [RFC5226]   Narten, T. and H. Alvestrand, "Guidelines for Writing an
               IANA Considerations Section in RFCs", BCP 26, RFC 5226,
               May 2008.

   [RFC6840]   Weiler, S., Ed., and D. Blacka, Ed., "Clarifications and
               Implementation Notes for DNS Security (DNSSEC)",
               RFC 6840, February 2013.

   [RFC6891]   Damas, J., Graff, M., and Vixie, P., "Extension
               Mechanisms for DNS (EDNS(0))", STD 75, RFC 6891, April
               2013.

   [US-ASCII]  American National Standards Institute (formerly United
               States of America Standards Institute), "USA Code for
               Information Interchange", ANSI X3.4-1968, 1968.

               ANSI X3.4-1968 has been replaced by newer versions with
               slight modifications, but the 1968 version remains
               definitive for the Internet.

Informative References

   [Dyer1987]  Dyer, S., and F. Hsu, "Hesiod", Project Athena Technical
               Plan - Name Service, April 1987.

   [Moon1981]  Moon, D., "Chaosnet", A.I. Memo 628, Massachusetts
               Institute of Technology Artificial Intelligence
               Laboratory, June 1981.

   [RFC1183]   Everhart, C., Mamakos, L., Ullmann, R., and P.
               Mockapetris, "New DNS RR Definitions", RFC 1183,
               October 1990.

   [RFC1591]   Postel, J., "Domain Name System Structure and
               Delegation", RFC 1591, March 1994.

   [RFC2606]   Eastlake 3rd, D. and A. Panitz, "Reserved Top Level DNS
               Names", BCP 32, RFC 2606, June 1999.

   [RFC2673]   Crawford, M., "Binary Labels in the Domain Name System",
               RFC 2673, August 1999.

   [RFC2931]   Eastlake 3rd, D., "DNS Request and Transaction Signatures
               ( SIG(0)s )", RFC 2931, September 2000.



RFC 6895                 DNS IANA Considerations              April 2013


   [RFC4343]   Eastlake 3rd, D., "Domain Name System (DNS) Case
               Insensitivity Clarification", RFC 4343, January 2006.

   [RFC5864]   Allbery, R., "DNS SRV Resource Records for AFS",
               RFC 5864, April 2010.

   [RFC6195]   Eastlake 3rd, D., "Domain Name System (DNS) IANA
               Considerations", RFC 6195, March 2011.

Acknowledgements

   Alfred Hoenes' contributions are gratefully acknowledged as are those
   by Mark Andrews, Dick Franks, and Michael Sheldon.

Author's Address

   Donald E. Eastlake 3rd
   Huawei Technologies
   155 Beaver Street
   Milford, MA  01757
   USA

   Phone: +1-508-333-2270
   EMail: d3e3e3@gmail.com