Rfc4419
TitleDiffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol
AuthorM. Friedl, N. Provos, W. Simpson
DateMarch 2006
Format:TXT, HTML
Updated byRFC8270
Status:PROPOSED STANDARD






Network Working Group                                          M. Friedl
Request for Comments: 4419                                     N. Provos
Category: Standards Track                                     W. Simpson
                                                              March 2006


                   Diffie-Hellman Group Exchange for
            the Secure Shell (SSH) Transport Layer Protocol

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo describes a new key exchange method for the Secure Shell
   (SSH) protocol.  It allows the SSH server to propose new groups on
   which to perform the Diffie-Hellman key exchange to the client.  The
   proposed groups need not be fixed and can change with time.

1.  Overview and Rationale

   SSH [RFC4251] is a very common protocol for secure remote login on
   the Internet.  Currently, SSH performs the initial key exchange using
   the "diffie-hellman-group1-sha1" method [RFC4253].  This method
   prescribes a fixed group on which all operations are performed.

   The Diffie-Hellman key exchange provides a shared secret that cannot
   be determined by either party alone.  Furthermore, the shared secret
   is known only to the participant parties.  In SSH, the key exchange
   is signed with the host key to provide host authentication.

   The security of the Diffie-Hellman key exchange is based on the
   difficulty of solving the Discrete Logarithm Problem (DLP).  Since we
   expect that the SSH protocol will be in use for many years in the
   future, we fear that extensive precomputation and more efficient
   algorithms to compute the discrete logarithm over a fixed group might
   pose a security threat to the SSH protocol.





RFC 4419                 SSH DH Group Exchange                March 2006


   The ability to propose new groups will reduce the incentive to use
   precomputation for more efficient calculation of the discrete
   logarithm.  The server can constantly compute new groups in the
   background.

2.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Diffie-Hellman Group and Key Exchange

   The server keeps a list of safe primes and corresponding generators
   that it can select from.  A prime p is safe if p = 2q + 1 and q is
   prime.  New primes can be generated in the background.

   The generator g should be chosen such that the order of the generated
   subgroup does not factor into small primes; that is, with p = 2q + 1,
   the order has to be either q or p - 1.  If the order is p - 1, then
   the exponents generate all possible public values, evenly distributed
   throughout the range of the modulus p, without cycling through a
   smaller subset.  Such a generator is called a "primitive root" (which
   is trivial to find when p is "safe").

   The client requests a modulus from the server indicating the
   preferred size.  In the following description (C is the client, S is
   the server, the modulus p is a large safe prime, and g is a generator
   for a subgroup of GF(p), min is the minimal size of p in bits that is
   acceptable to the client, n is the size of the modulus p in bits that
   the client would like to receive from the server, max is the maximal
   size of p in bits that the client can accept, V_S is S's version
   string, V_C is C's version string, K_S is S's public host key, I_C is
   C's KEXINIT message, and I_S is S's KEXINIT message that has been
   exchanged before this part begins):

   1.  C sends "min || n || max" to S, indicating the minimal acceptable
       group size, the preferred size of the group, and the maximal
       group size in bits the client will accept.

   2.  S finds a group that best matches the client's request, and sends
       "p || g" to C.

   3.  C generates a random number x, where 1 < x < (p-1)/2.  It
       computes e = g^x mod p, and sends "e" to S.






RFC 4419                 SSH DH Group Exchange                March 2006


   4.  S generates a random number y, where 0 < y < (p-1)/2, and
       computes f = g^y mod p.  S receives "e".  It computes K = e^y mod
       p, H = hash(V_C || V_S || I_C || I_S || K_S || min || n || max ||
       p || g || e || f || K) (these elements are encoded according to
       their types; see below), and signature s on H with its private
       host key.  S sends "K_S || f || s" to C.  The signing operation
       may involve a second hashing operation.

   5.  C verifies that K_S really is the host key for S (e.g., using
       certificates or a local database to obtain the public key).  C is
       also allowed to accept the key without verification; however,
       doing so will render the protocol insecure against active attacks
       (but may be desirable for practical reasons in the short term in
       many environments).  C then computes K = f^x mod p, H = hash(V_C
       || V_S || I_C || I_S || K_S || min || n || max || p || g || e ||
       f || K), and verifies the signature s on H.

   Servers and clients SHOULD support groups with a modulus length of k
   bits, where 1024 <= k <= 8192.  The recommended values for min and
   max are 1024 and 8192, respectively.

   Either side MUST NOT send or accept e or f values that are not in the
   range [1, p-1].  If this condition is violated, the key exchange
   fails.  To prevent confinement attacks, they MUST accept the shared
   secret K only if 1 < K < p - 1.

   The server should return the smallest group it knows that is larger
   than the size the client requested.  If the server does not know a
   group that is larger than the client request, then it SHOULD return
   the largest group it knows.  In all cases, the size of the returned
   group SHOULD be at least 1024 bits.

   This is implemented with the following messages.  The hash algorithm
   for computing the exchange hash is defined by the method name, and is
   called HASH.  The public key algorithm for signing is negotiated with
   the KEXINIT messages.

   First, the client sends:

     byte    SSH_MSG_KEY_DH_GEX_REQUEST
     uint32  min, minimal size in bits of an acceptable group
     uint32  n, preferred size in bits of the group the server will send
     uint32  max, maximal size in bits of an acceptable group








RFC 4419                 SSH DH Group Exchange                March 2006


   The server responds with

     byte    SSH_MSG_KEX_DH_GEX_GROUP
     mpint   p, safe prime
     mpint   g, generator for subgroup in GF(p)

   The client responds with:

     byte    SSH_MSG_KEX_DH_GEX_INIT
     mpint   e

   The server responds with:

     byte    SSH_MSG_KEX_DH_GEX_REPLY
     string  server public host key and certificates (K_S)
     mpint   f
     string  signature of H

   The hash H is computed as the HASH hash of the concatenation of the
   following:

     string  V_C, the client's version string (CR and NL excluded)
     string  V_S, the server's version string (CR and NL excluded)
     string  I_C, the payload of the client's SSH_MSG_KEXINIT
     string  I_S, the payload of the server's SSH_MSG_KEXINIT
     string  K_S, the host key
     uint32  min, minimal size in bits of an acceptable group
     uint32  n, preferred size in bits of the group the server will send
     uint32  max, maximal size in bits of an acceptable group
     mpint   p, safe prime
     mpint   g, generator for subgroup
     mpint   e, exchange value sent by the client
     mpint   f, exchange value sent by the server
     mpint   K, the shared secret

   This value is called the exchange hash, and it is used to
   authenticate the key exchange as per [RFC4253].

4.  Key Exchange Methods

   This document defines two new key exchange methods:
   "diffie-hellman-group-exchange-sha1" and
   "diffie-hellman-group-exchange-sha256".








RFC 4419                 SSH DH Group Exchange                March 2006


4.1.  diffie-hellman-group-exchange-sha1

   The "diffie-hellman-group-exchange-sha1" method specifies
   Diffie-Hellman Group and Key Exchange with SHA-1 [FIPS-180-2] as
   HASH.

4.2.  diffie-hellman-group-exchange-sha256

   The "diffie-hellman-group-exchange-sha256" method specifies
   Diffie-Hellman Group and Key Exchange with SHA-256 [FIPS-180-2] as
   HASH.

   Note that the hash used in key exchange (in this case, SHA-256) must
   also be used in the key derivation pseudo-random function (PRF), as
   per the requirement in the "Output from Key Exchange" section in
   [RFC4253].

5.  Summary of Message Numbers

   The following message numbers have been defined in this document.
   They are in a name space private to this document and not assigned by
   IANA.

     #define SSH_MSG_KEX_DH_GEX_REQUEST_OLD  30
     #define SSH_MSG_KEX_DH_GEX_REQUEST      34
     #define SSH_MSG_KEX_DH_GEX_GROUP        31
     #define SSH_MSG_KEX_DH_GEX_INIT         32
     #define SSH_MSG_KEX_DH_GEX_REPLY        33

   SSH_MSG_KEX_DH_GEX_REQUEST_OLD is used for backward compatibility.
   Instead of sending "min || n || max", the client only sends "n".  In
   addition, the hash is calculated using only "n" instead of "min || n
   || max".

   The numbers 30-49 are key exchange specific and may be redefined by
   other kex methods.

6.  Implementation Notes

6.1.  Choice of Generator

   One useful technique is to select the generator, and then limit the
   modulus selection sieve to primes with that generator:

      2   when p (mod 24) = 11.
      5   when p (mod 10) = 3 or 7.





RFC 4419                 SSH DH Group Exchange                March 2006


   It is recommended to use 2 as generator, because it improves
   efficiency in multiplication performance.  It is usable even when it
   is not a primitive root, as it still covers half of the space of
   possible residues.

6.2.  Private Exponents

   To increase the speed of the key exchange, both client and server may
   reduce the size of their private exponents.  It should be at least
   twice as long as the key material that is generated from the shared
   secret.  For more details, see the paper by van Oorschot and Wiener
   [VAN-OORSCHOT].

7.  Security Considerations

   This protocol aims to be simple and uses only well-understood
   primitives.  This encourages acceptance by the community and allows
   for ease of implementation, which hopefully leads to a more secure
   system.

   The use of multiple moduli inhibits a determined attacker from
   precalculating moduli exchange values, and discourages dedication of
   resources for analysis of any particular modulus.

   It is important to employ only safe primes as moduli, as they allow
   us to find a generator g so that the order of the generated subgroup
   does not factor into small primes, that is, with p = 2q + 1, the
   order has to be either q or p - 1.  If the order is p - 1, then the
   exponents generate all possible public values, evenly distributed
   throughout the range of the modulus p, without cycling through a
   smaller subset.  Van Oorshot and Wiener note that using short private
   exponents with a random prime modulus p makes the computation of the
   discrete logarithm easy [VAN-OORSCHOT].  However, they also state
   that this problem does not apply to safe primes.

   The least significant bit of the private exponent can be recovered
   when the modulus is a safe prime [MENEZES].  However, this is not a
   problem if the size of the private exponent is big enough.  Related
   to this, Waldvogel and Massey note: When private exponents are chosen
   independently and uniformly at random from {0,...,p-2}, the key
   entropy is less than 2 bits away from the maximum, lg(p-1)
   [WALDVOGEL].

   The security considerations in [RFC4251] also apply to this key
   exchange method.






RFC 4419                 SSH DH Group Exchange                March 2006


8.  Acknowledgements

   The document is derived in part from "SSH Transport Layer Protocol"
   [RFC4253] by T. Ylonen, T. Kivinen, M. Saarinen, T.  Rinne, and S.
   Lehtinen.

   Markku-Juhani Saarinen pointed out that the least significant bit of
   the private exponent can be recovered efficiently when using safe
   primes and a subgroup with an order divisible by two.

   Bodo Moeller suggested that the server send only one group, reducing
   the complexity of the implementation and the amount of data that
   needs to be exchanged between client and server.






































RFC 4419                 SSH DH Group Exchange                March 2006


Appendix A:  Generation of Safe Primes

   The "Handbook of Applied Cryptography" [MENEZES] lists the following
   algorithm to generate a k-bit safe prime p.  It has been modified so
   that 2 is a generator for the multiplicative group mod p.

   1.  Do the following:

       1.  Select a random (k-1)-bit prime q, so that q mod 12 = 5.

       2.  Compute p := 2q + 1, and test whether p is prime (using,
           e.g., trial division and the Rabin-Miller test).

   2.  Repeat until p is prime.

   If an implementation uses the OpenSSL libraries, a group consisting
   of a 1024-bit safe prime and 2 as generator can be created as
   follows:

       DH *d = NULL;
       d = DH_generate_parameters(1024, DH_GENERATOR_2, NULL, NULL);
       BN_print_fp(stdout, d->p);

   The order of the subgroup generated by 2 is q = p - 1.

References

Normative References

   [FIPS-180-2]   National Institute of Standards and Technology (NIST),
                  "Secure Hash Standard (SHS)", FIPS PUB 180-2,
                  August 2002.

   [RFC4251]      Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
                  Protocol Architecture", RFC 4251, January 2006.

   [RFC4253]      Lonvick, C., "The Secure Shell (SSH) Transport Layer
                  Protocol", RFC 4253, January 2006.

   [RFC2119]      Bradner, S., "Key words for use in RFCs to Indicate
                  Requirement Levels", BCP 14, RFC 2119, March 1997.

Informative References

   [MENEZES]      Menezes, A., van Oorschot, P., and S. Vanstone,
                  "Handbook of Applied Cryptography", CRC Press, p. 537,
                  1996.




RFC 4419                 SSH DH Group Exchange                March 2006


   [VAN-OORSCHOT] van Oorschot, P. and M. Wiener, "On Diffie-Hellman key
                  agreement with short exponents", Advances in
                  Cryptology -EUROCRYPT'96, LNCS 1070,
                  Springer-Verlag, pp. 332-343, 1996.

   [WALDVOGEL]    Waldvogel, C. and J. Massey, "The probability
                  distribution of the Diffie-Hellman key", Proceedings
                  of AUSCRYPT 92, LNCS 718, Springer-Verlag, pp.
                  492-504, 1993.

Authors' Addresses

   Markus Friedl
   EMail: markus@openbsd.org


   Niels Provos
   EMail: provos@citi.umich.edu


   William A. Simpson
   EMail: wsimpson@greendragon.com





























RFC 4419                 SSH DH Group Exchange                March 2006


Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).