Rfc4982
TitleSupport for Multiple Hash Algorithms in Cryptographically Generated Addresses (CGAs)
AuthorM. Bagnulo, J. Arkko
DateJuly 2007
Format:TXT, HTML
UpdatesRFC3972
Status:PROPOSED STANDARD






Network Working Group                                         M. Bagnulo
Request for Comments: 4982                                          UC3M
Updates: 3972                                                   J. Arkko
Category: Standards Track                                       Ericsson
                                                               July 2007


                Support for Multiple Hash Algorithms in
              Cryptographically Generated Addresses (CGAs)

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document analyzes the implications of recent attacks on commonly
   used hash functions on Cryptographically Generated Addresses (CGAs)
   and updates the CGA specification to support multiple hash
   algorithms.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 2
   3.  Impact of Collision Attacks in CGAs . . . . . . . . . . . . . . 2
   4.  Options for Multiple Hash Algorithm Support in CGAs . . . . . . 3
     4.1.  Where to Encode the Hash Function?  . . . . . . . . . . . . 4
   5.  CGA Generation Procedure  . . . . . . . . . . . . . . . . . . . 6
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
   7.  Security Considerations . . . . . . . . . . . . . . . . . . . . 7
   8.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 7
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 7
     9.1.  Normative References  . . . . . . . . . . . . . . . . . . . 7
     9.2.  Informative References  . . . . . . . . . . . . . . . . . . 7








RFC 4982             Multiple Hash Support in CGAs             July 2007


1.  Introduction

   Recent attacks to currently used hash functions have motivated a
   considerable amount of concern in the Internet community.  The
   recommended approach [6] [10] to deal with this issue is first to
   analyze the impact of these attacks on the different Internet
   protocols that use hash functions and second to make sure that the
   different Internet protocols that use hash functions are capable of
   migrating to an alternative (more secure) hash function without a
   major disruption in the Internet operation.

   This document performs such analysis for the Cryptographically
   Generated Addresses (CGAs) defined in [2].  The first conclusion of
   the analysis is that the security of the protocols using CGAs is not
   affected by the recently available attacks against hash functions.
   The second conclusion of the analysis is that the hash function used
   is hard coded in the CGA specification.  This document updates the
   CGA specification [2] to enable the support of alternative hash
   functions.  In order to do so, this document creates a new registry
   managed by IANA to register the different hash algorithms used in
   CGAs.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [1].

3.  Impact of Collision Attacks in CGAs

   Recent advances in cryptography have resulted in simplified attacks
   against the collision-free property of certain commonly used hash
   functions [6] [10], including SHA-1 that is the hash function used by
   CGAs [2].  The result is that it is possible to obtain two messages,
   M1 and M2, that have the same hash value with much less than 2^(L/2)
   attempts.  We will next analyze the impact of such attacks in the
   currently proposed usages of CGAs.

   As we understand it, the attacks against the collision-free property
   of a hash function mostly challenge the application of such hash
   functions, for the provision of non-repudiation capabilities.  This
   is because an attacker would be capable to create two different
   messages that result in the same hash value and it can then present
   any of the messages interchangeably (for example after one of them
   has been signed by the other party involved in the transaction).
   However, it must be noted that both messages must be generated by the
   same party.




RFC 4982             Multiple Hash Support in CGAs             July 2007


   As far as we understand, current usages of CGAs does not include the
   provision of non-repudiation capabilities, so attacks against the
   collision-free property of the hash function do not enable any useful
   attack against CGA-based protocols.

   Current usages of the CGAs are basically oriented to prove the
   ownership of a CGA and then bind it to alternative addresses that can
   be used to reach the original CGA.  This type of application of the
   CGA include:

   o  The application of CGAs to protect the shim6 protocol [7].  In
      this case, CGAs are used as identifiers for the established
      communications.  CGA features are used to prove that the owner of
      the identifier is the one that is providing the alternative
      addresses that can be used to reach the initial identifier.  This
      is achieved by signing the list of alternative addresses available
      in the multihomed host with the private key of the CGA.

   o  The application of CGAs to secure the IPv6 mobility support
      protocol [8] as proposed in [9].  In this case, the CGAs are used
      as Home Addresses and they are used to prove that the owner of the
      Home Address is the one creating the binding with the new Care-off
      Address.  Similarly to the previous case, this is achieved by
      signing the Binding Update message carrying the Care-off Address
      with the private key of the CGA.

   o  The application of CGA to Secure Neighbour Discovery [4].  In this
      case, the CGA features are used to prove the address ownership, so
      that it is possible to verify that the owner of the IP address is
      the one that is providing the layer 2 address information.  This
      is achieved by signing the layer 2 address information with the
      private key of the CGA.

   Essentially, all the current applications of CGAs rely on CGAs to
   protect a communication between two peers from third party attacks
   and not to provide protection from the peer itself.  Attacks against
   the collision-free property of the hash functions suppose that one of
   the parties is generating two messages with the same hash value in
   order to launch an attack against its communicating peer.  Since CGAs
   are not currently used to providing this type of protection, it is
   then natural that no additional attacks are enabled by a weaker
   collision resistance of the hash function.

4.  Options for Multiple Hash Algorithm Support in CGAs

   CGAs, as currently defined in [2], are intrinsically bound to the
   SHA-1 hash algorithm and no other hash function is supported.




RFC 4982             Multiple Hash Support in CGAs             July 2007


   Even though the attacks against the collision-free property of the
   hash functions do not result in new vulnerabilities in the current
   applications of CGAs, it seems wise to enable multiple hash function
   support in CGAs.  This is mainly for two reasons: first, potential
   future applications of the CGA technology may be susceptible to
   attacks against the collision-free property of SHA-1.  Supporting
   alternative hash functions would allow applications that have
   stricter requirements on the collision-free property to use CGAs.
   Second, one lesson learned from the recent attacks against hash
   functions is that it is possible that one day we need to start using
   alternative hash functions because of successful attacks against
   other properties of the commonly used hash functions.  Therefore, it
   seems wise to modify protocols in general and the CGAs in particular
   to support this transition to alternative hash functions as easy as
   possible.

4.1.  Where to Encode the Hash Function?

   The next question we need to answer is where to encode the hash
   function that is being used.  There are several options that can be
   considered:

   One option would be to include the hash function used as an input to
   the hash function.  This basically means to create an extension to
   the CGA Parameter Data Structure, as defined in [3], that codifies
   the hash function used.  The problem is that this approach is
   vulnerable to bidding down attacks or downgrading attacks as defined
   in [10].  This means that even if a strong hash function is used, an
   attacker could find a CGA Parameter Data Structure that uses a weaker
   function but results in an equal hash value.  This happens when the
   original hash function H1 and CGA Parameters Data Structure
   indicating H1 result in value X, and another hash function H2 and CGA
   Parameters Data Structure indicating H2 also result in the same value
   X.

   In other words, the downgrading attack would work as follows: suppose
   that Alice generates a CGA CGA_A using the strong hash function
   HashStrong and using a CGA Parameter Data Structure CGA_PDS_A.  The
   selected hash function HashStrong is encoded as an extension field in
   the CGA_PDS_A.  Suppose that by using a brute force attack, an
   attacker X finds an alternative CGA Parameter Data Structure
   CGA_PDS_X whose hash value, by using a weaker hash function, is
   CGA_A.  At this point, the attacker can pretend to be the owner of
   CGA_A and the stronger hash function has not provided additional
   protection.

   The conclusion from the previous analysis is that the hash function
   used in the CGA generation must be encoded in the address itself.



RFC 4982             Multiple Hash Support in CGAs             July 2007


   Since we want to support several hash functions, we will likely need
   at least 2 or 3 bits for this.

   One option would be to use more bits from the hash bits of the
   interface identifier.  However, the problem with this approach is
   that the resulting CGA is weaker because less hash information is
   encoded in the address.  In addition, since those bits are currently
   used as hash bits, it is impossible to make this approach backward
   compatible with existent implementations.

   Another option would be to use the "u" and the "g" bits to encode
   this information, but this is probably not such a good idea since
   those bits have been honoured so far in all interface identifier
   generation mechanisms, which allow them to be used for the original
   purpose (for instance we can still create a global registry for
   unique interface identifiers).  Finally, another option is to encode
   the hash value used in the Sec bits.  The Sec bits are used to
   artificially introduce additional difficulty in the CGA generation
   process in order to provide additional protection against brute force
   attacks.  The Sec bits have been designed in a way that the lifetime
   of CGAs are extended, when it is feasible to attack 59-bits long hash
   values.  However, this is not the case today, so in general CGA will
   have a Sec value of 000.  The proposal is to encode in the Sec bits,
   not only information about brute force attack protection but also to
   encode the hash function used to generate the hash.  So for instance,
   the Sec value 000 would mean that the hash function used is SHA-1 and
   the 0 bits of hash2 (as defined in RFC 3972) must be 0.  Sec value of
   001 could be that the hash function used is SHA-1 and the 16 bits of
   hash2 (as defined in RFC 3972) must be zero.  However, the other
   values of Sec could mean that an alternative hash function needs to
   be used and that a certain amount of bits of hash2 must be zero.  The
   proposal is not to define any concrete hash function to be used for
   other Sec values, since it is not yet clear that we need to do so nor
   is it clear which hash function should be selected.

   Note that since there are only 8 Sec values, it may be necessary to
   reuse Sec values when we run out of unused Sec values.  The scenario
   where such an approach makes sense is where there are some Sec values
   that are no longer being used because the resulting security has
   become weak.  In this case, where the usage of the Sec value has long
   been abandoned, it would be possible to reassign the Sec values.
   However, this must be a last resource option, since it may affect
   interoperability.  This is because two implementations using
   different meanings of a given Sec value would not be able to
   interoperate properly (i.e., if an old implementation receives a CGA
   generated with the new meaning of the Sec value, it will fail and the
   same for a new implementation receiving a CGA generated with the old
   meaning of the Sec value).  In case the approach of reassigning a Sec



RFC 4982             Multiple Hash Support in CGAs             July 2007


   value is followed, a long time is required between the deprecation of
   the old value and the reassignment in order to prevent
   misinterpretation of the value by old implementations.

   An erroneous interpretation of a reused Sec value, both on the CGA
   owner's side and the CGA verifier's side, would have the following
   result, CGA verification would fail in the worst case and both nodes
   would have to revert to unprotected IPv6 addresses.  This can happen
   only with obsolete CGA parameter sets, which would be considered
   insecure anyway.  In any case, an implementation must not
   simultaneously support two different meanings of a Sec value.

5.  CGA Generation Procedure

   The SEC registry defined in the IANA considerations section of this
   document contains entries for the different Sec values.  Each of
   these entries points to an RFC that defines the CGA generation
   procedure that MUST be used when generating CGAs with the associated
   Sec value.

   It should be noted that the CGA generation procedure may be changed
   by the new procedure not only in terms of the hash function used but
   also in other aspects, e.g., longer Modifier values may be required
   if the number of 0s required in hash2 exceed the currently defined
   bound of 112 bits.  The new procedure (which potentially involves a
   longer Modifier value) would be described in the RFC pointed to by
   the corresponding Sec registry entry.

   In addition, the RFC that defines the CGA generation procedure for a
   Sec value MUST explicitly define the minimum key length acceptable
   for CGAs with that Sec value.  This is to provide a coherent
   protection both in the hash and the public key techniques.

6.  IANA Considerations

   This document defines a new registry entitled "CGA SEC" for the Sec
   field defined in RFC 3972 [2] that has been created and is maintained
   by IANA.  The values in this name space are 3-bit unsigned integers.

   Initial values for the CGA Extension Type field are given below;
   future assignments are to be made through Standards Action [5].
   Assignments consist of a name, the value, and the RFC number where
   the CGA generation procedure is defined.








RFC 4982             Multiple Hash Support in CGAs             July 2007


   The following initial values are assigned in this document:

          Name        | Value |  RFCs
   -------------------+-------+------------
   SHA-1_0hash2bits   |   000 | 3972, 4982
   SHA-1_16hash2bits  |   001 | 3972, 4982
   SHA-1_32hash2bits  |   010 | 3972, 4982

7.  Security Considerations

   This document is about security issues and, in particular, about
   protection against potential attacks against hash functions.

8.  Acknowledgements

   Russ Housley, James Kempf, Christian Vogt, Pekka Nikander, and Henrik
   Levkowetz reviewed and provided comments about this document.

   Marcelo Bagnulo worked on this document while visiting Ericsson
   Research Laboratory Nomadiclab.

9.  References

9.1.  Normative References

   [1]   Bradner, S., "Key words for use in RFCs to Indicate Requirement
         Levels", BCP 14, RFC 2119, March 1997.

   [2]   Aura, T., "Cryptographically Generated Addresses (CGA)",
         RFC 3972, March 2005.

   [3]   Bagnulo, M. and J. Arkko, "Cryptographically Generated
         Addresses (CGA) Extension Field Format", RFC 4581,
         October 2006.

   [4]   Arkko, J., Kempf, J., Zill, B., and P. Nikander, "SEcure
         Neighbor Discovery (SEND)", RFC 3971, March 2005.

9.2.  Informative References

   [5]   Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA
         Considerations Section in RFCs", BCP 26, RFC 2434,
         October 1998.

   [6]   Hoffman, P. and B. Schneier, "Attacks on Cryptographic Hashes
         in Internet Protocols", RFC 4270, November 2005.





RFC 4982             Multiple Hash Support in CGAs             July 2007


   [7]   Nordmark, E. and M. Bagnulo, "Multihoming L3 Shim Approach",
         Work in Progress, July 2005.

   [8]   Johnson, D., Perkins, C., and J. Arkko, "Mobility Support in
         IPv6", RFC 3775, June 2004.

   [9]   Arkko, J., "Applying Cryptographically Generated Addresses and
         Credit-Based Authorization to Mobile IPv6", Work in Progress,
         June 2006.

   [10]  Bellovin, S. and E. Rescorla, "Deploying a New Hash Algorithm",
         NDSS '06, February 2006.

Authors' Addresses

   Marcelo Bagnulo
   Universidad Carlos III de Madrid
   Av. Universidad 30
   Leganes, Madrid  28911
   SPAIN

   Phone: 34 91 6249500
   EMail: marcelo@it.uc3m.es
   URI:   http://www.it.uc3m.es


   Jari Arkko
   Ericsson
   Jorvas  02420
   Finland

   EMail: jari.arkko@ericsson.com



















RFC 4982             Multiple Hash Support in CGAs             July 2007


Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.