Rfc5958
TitleAsymmetric Key Packages
AuthorS. Turner
DateAugust 2010
Format:TXT, HTML
ObsoletesRFC5208
Status:PROPOSED STANDARD






Internet Engineering Task Force (IETF)                         S. Turner
Request for Comments: 5958                                          IECA
Obsoletes: 5208                                              August 2010
Category: Standards Track
ISSN: 2070-1721


                        Asymmetric Key Packages

Abstract

   This document defines the syntax for private-key information and a
   content type for it.  Private-key information includes a private key
   for a specified public-key algorithm and a set of attributes.  The
   Cryptographic Message Syntax (CMS), as defined in RFC 5652, can be
   used to digitally sign, digest, authenticate, or encrypt the
   asymmetric key format content type.  This document obsoletes RFC
   5208.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by
   the Internet Engineering Steering Group (IESG).  Further
   information on Internet Standards is available in Section 2 of
   RFC 5741.

   Information about the current status of this document, any
   errata, and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5958.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.



RFC 5958                 Asymmetric Key Packages             August 2010


   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

1.  Introduction

   This document defines the syntax for private-key information and a
   Cryptographic Message Syntax (CMS) [RFC5652] content type for it.
   Private-key information includes a private key for a specified
   public-key algorithm and a set of attributes.  The CMS can be used to
   digitally sign, digest, authenticate, or encrypt the asymmetric key
   format content type.  This document obsoletes PKCS #8 v1.2 [RFC5208].

1.1.  Requirements Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  ASN.1 Syntax Notation

   The key package is defined using ASN.1 [X.680], [X.681], [X.682], and
   [X.683].

1.3.  Summary of Updates to RFC 5208

   The following summarizes the updates to [RFC5208]:

   - Changed the name "PrivateKeyInfo" to "OneAsymmetricKey".  This
     reflects the addition of the publicKey field to allow both parts of
     the asymmetric key to be conveyed separately.  Not all algorithms
     will use both fields; however, the publicKey field was added for
     completeness.

   - Defined Asymmetric Key Package CMS content type.

   - Removed redundant IMPLICIT from attributes.

   - Added publicKey to OneAsymmetricKey and updated the version number.




RFC 5958                 Asymmetric Key Packages             August 2010


   - Added that PKCS #9 attributes may be supported.

   - Added discussion of compatibility with other private-key formats.

   - Added requirements for encoding rule set.

   - Changed imports from PKCS #5 to [RFC5912] and [RFC5911].

   - Replaced ALGORITHM-IDENTIFIER with ALGORITHM from [RFC5912].

   - Registers application/pkcs8 media type and .p8 file extension.

2.  Asymmetric Key Package CMS Content Type

   The asymmetric key package CMS content type is used to transfer one
   or more plaintext asymmetric keys from one party to another.  An
   asymmetric key package MAY be encapsulated in one or more CMS
   protecting content types (see Section 4).  Earlier versions of this
   specification [RFC5208] did not specify a particular encoding rule
   set, but generators SHOULD use DER [X.690] and receivers MUST support
   BER [X.690], which also includes DER [X.690].

   The asymmetric key package content type has the following syntax:

     ct-asymmetric-key-package CONTENT-TYPE ::=
       { AsymmetricKeyPackage IDENTIFIED BY id-ct-KP-aKeyPackage }

     id-ct-KP-aKeyPackage OBJECT IDENTIFIER ::=
       { joint-iso-itu-t(2) country(16) us(840) organization(1)
         gov(101) dod(2) infosec(1) formats(2)
         key-package-content-types(78) 5
       }

     AsymmetricKeyPackage ::= SEQUENCE SIZE (1..MAX) OF OneAsymmetricKey

     OneAsymmetricKey ::= SEQUENCE {
       version                   Version,
       privateKeyAlgorithm       PrivateKeyAlgorithmIdentifier,
       privateKey                PrivateKey,
       attributes            [0] Attributes OPTIONAL,
       ...,
       [[2: publicKey        [1] PublicKey OPTIONAL ]],
       ...
     }







RFC 5958                 Asymmetric Key Packages             August 2010


     PrivateKeyInfo ::= OneAsymmetricKey

     -- PrivateKeyInfo is used by [P12].  If any items tagged as version
     -- 2 are used, the version must be v2, else the version should be
     -- v1.  When v1, PrivateKeyInfo is the same as it was in [RFC5208].

     Version ::= INTEGER { v1(0), v2(1) } (v1, ..., v2)

     PrivateKeyAlgorithmIdentifier ::= AlgorithmIdentifier
                                        { PUBLIC-KEY,
                                          { PrivateKeyAlgorithms } }

     PrivateKey ::= OCTET STRING
                        -- Content varies based on type of key.  The
                        -- algorithm identifier dictates the format of
                        -- the key.

     PublicKey ::= BIT STRING
                        -- Content varies based on type of key.  The
                        -- algorithm identifier dictates the format of
                        -- the key.

     Attributes ::= SET OF Attribute { { OneAsymmetricKeyAttributes } }

   The AsymmetricKeyPackage contains one or more OneAsymmetricKey
   elements.

   The syntax of OneAsymmetricKey accommodates a version number, an
   indication of the asymmetric algorithm to be used with the private
   key, a private key, optional keying material attributes (e.g.,
   userCertificate from [X.520]), and an optional public key.  In
   general, either the public key or the certificate will be present.
   In very rare cases will both the public key and the certificate be
   present as this includes two copies of the public key.
   OneAsymmetricKey renames the PrivateKeyInfo syntax defined in
   [RFC5208].  The new name better reflects the ability to carry both
   private- and public-key components.  Backwards compatibility with the
   original PrivateKeyInfo is preserved via version number.  The fields
   in OneAsymmetricKey are used as follows:

   - version identifies the version of OneAsymmetricKey.  If publicKey
     is present, then version is set to v2 else version is set to v1.

   - privateKeyAlgorithm identifies the private-key algorithm and
     optionally contains parameters associated with the asymmetric key
     pair.  The algorithm is identified by an object identifier (OID)
     and the format of the parameters depends on the OID, but the
     PrivateKeyAlgorithms information object set restricts the



RFC 5958                 Asymmetric Key Packages             August 2010


     permissible OIDs.  The value placed in
     privateKeyAlgorithmIdentifier is the value an originator would
     apply to indicate which algorithm is to be used with the private
     key.

   - privateKey is an OCTET STRING that contains the value of the
     private key.  The interpretation of the content is defined in the
     registration of the private-key algorithm.  For example, a DSA key
     is an INTEGER, an RSA key is represented as RSAPrivateKey as
     defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key
     is represented as ECPrivateKey as defined in [RFC5915].

   - attributes is OPTIONAL.  It contains information corresponding to
     the public key (e.g., certificates).  The attributes field uses the
     class ATTRIBUTE which is restricted by the
     OneAsymmetricKeyAttributes information object set.
     OneAsymmetricKeyAttributes is an open ended set in this document.
     Others documents can constrain these values.  Attributes from
     [RFC2985] MAY be supported.

   - publicKey is OPTIONAL.  When present, it contains the public key
     encoded in a BIT STRING.  The structure within the BIT STRING, if
     any, depends on the privateKeyAlgorithm.  For example, a DSA key is
     an INTEGER.  Note that RSA public keys are included in
     RSAPrivateKey (i.e., n and e are present), as per [RFC3447], and
     ECC public keys are included in ECPrivateKey (i.e., in the
     publicKey field), as per [RFC5915].

3.  Encrypted Private Key Info

   This section gives the syntax for encrypted private-key information,
   which is used by [P12].

   Encrypted private-key information shall have ASN.1 type
   EncryptedPrivateKeyInfo:

     EncryptedPrivateKeyInfo ::= SEQUENCE {
       encryptionAlgorithm  EncryptionAlgorithmIdentifier,
       encryptedData        EncryptedData }

     EncryptionAlgorithmIdentifier ::= AlgorithmIdentifier
                                        { CONTENT-ENCRYPTION,
                                          { KeyEncryptionAlgorithms } }

     EncryptedData ::= OCTET STRING






RFC 5958                 Asymmetric Key Packages             August 2010


   The fields in EncryptedPrivateKeyInfo are used as follows:

   - encryptionAlgorithm identifies the algorithm under which the
     private-key information is encrypted.

   - encryptedData is the result of encrypting the private-key
     information  (i.e., the PrivateKeyInfo).

   The encryption process involves the following two steps:

   1. The private-key information is encoded, yielding an octet string.
      Generators SHOULD use DER [X.690] and receivers MUST support BER
      [X.690], which also includes DER [X.690].

   2. The result of step 1 is encrypted with the secret key to give an
      octet string, the result of the encryption process.

4.  Protecting the AsymmetricKeyPackage

   CMS protecting content types, [RFC5652] and [RFC5083], can be used to
   provide security to the AsymmetricKeyPackage:

   - SignedData can be used to apply a digital signature to the
     AsymmetricKeyPackage.

   - EncryptedData can be used to encrypt the AsymmetricKeyPackage with
     symmetric encryption, where the sender and the receiver already
     share the necessary encryption key.

   - EnvelopedData can be used to encrypt the AsymmetricKeyPackage with
     symmetric encryption, where the sender and the receiver do not
     share the necessary encryption key.

   - AuthenticatedData can be used to protect the AsymmetricKeyPackage
     with message authentication codes, where key management information
     is handled in a manner similar to EnvelopedData.

   - AuthEnvelopedData can be used to protect the AsymmetricKeyPackage
     with algorithms that support authenticated encryption, where key
     management information is handled in a manner similar to
     EnvelopedData.

5.  Other Private-Key Format Considerations

   This document defines the syntax and the semantics for a content type
   that exchanges asymmetric private keys.  There are two other formats
   that have been used for the transport of asymmetric private keys:




RFC 5958                 Asymmetric Key Packages             August 2010


   - Personal Information Exchange (PFX) Syntax Standard [P12], which is
     more commonly referred to as PKCS #12 or simply P12, is a transfer
     syntax for personal identity information, including private keys,
     certificates, miscellaneous secrets, and extensions.
     OneAsymmetricKey, PrivateKeyInfo, and EncryptedPrivateKeyInfo can
     be carried in a P12 message.  The private key information,
     OneAsymmetricKey and PrivateKeyInfo, are carried in the P12 keyBag
     BAG-TYPE.  EncryptedPrivateKeyInfo is carried in the P12
     pkcs8ShroudedKeyBag BAG-TYPE.  In current implementations, the file
     extensions .pfx and .p12 can be used interchangeably.

   - Microsoft's private-key proprietary transfer syntax.  The .pvk file
     extension is used for local storage.

   The .pvk and .p12/.pfx formats are not interchangeable; however,
   conversion tools exist to convert from one format to another.

   To extract the private-key information from the AsymmetricKeyPackage,
   the encapsulating layers need to be removed.  At a minimum, the outer
   ContentInfo [RFC5652] layer needs to be removed.  If the
   AsymmetricKeyPackage is encapsulated in a SignedData [RFC5652], then
   the SignedData and EncapsulatedContentInfo layers [RFC5652] also need
   to be removed.  The same is true for EnvelopedData, EncryptedData,
   and AuthenticatedData all from [RFC5652] as well as AuthEnvelopedData
   from [RFC5083].  Once all the outer layers are removed, there are as
   many sets of private-key information as there are OneAsymmetricKey
   structures.  OneAsymmetricKey and PrivateKeyInfo are the same
   structure; therefore, either can be saved as a .p8 file or copied in
   to the P12 KeyBag BAG-TYPE.  Removing encapsulating security layers
   will invalidate any signature and may expose the key to unauthorized
   disclosure.

   .p8 files are sometimes PEM-encoded.  When .p8 files are PEM encoded
   they use the .pem file extension.  PEM encoding is either the Base64
   encoding, from Section 4 of [RFC4648], of the DER-encoded
   EncryptedPrivateKeyInfo sandwiched between:

   -----BEGIN ENCRYPTED PRIVATE KEY-----
   -----END ENCRYPTED PRIVATE KEY-----

   or the Base64 encoding, see Section 4 of [RFC4648], of the DER-
   encoded PrivateKeyInfo sandwiched between:

   -----BEGIN PRIVATE KEY-----
   -----END PRIVATE KEY-----






RFC 5958                 Asymmetric Key Packages             August 2010


6.  Security Considerations

   Protection of the private-key information is vital to public-key
   cryptography.  Disclosure of the private-key material to another
   entity can lead to masquerades.  The encryption algorithm used in the
   encryption process must be as 'strong' as the key it is protecting.

   The asymmetric key package contents are not protected.  This content
   type can be combined with a security protocol to protect the contents
   of the package.

7.  IANA Considerations

   This document makes use of object identifiers to identify a CMS
   content type and the ASN.1 module found in Appendix A.  The CMS
   content type OID is registered in a DoD arc.  The ASN.1 module OID is
   registered in an arc delegated by RSADSI to the SMIME Working Group.
   No further action by IANA is necessary for this document or any
   anticipated updates.

   This specification also defines a new media subtype that IANA has
   registered at http://www.iana.org/.

7.1.  Registration of media subtype application/pkcs8

   Type name: application

   Subtype name: pkcs8

   Required parameters: None

   Optional parameters: None

   Encoding considerations: binary

   Security considerations: Carries a cryptographic private key.
                            See section 6.

   Interoperability considerations:

         The PKCS #8 object inside this media type MUST be DER-encoded
         PrivateKeyInfo.

   Published specification: RFC 5958

   Applications which use this media type:

     Any MIME-compliant transport that processes asymmetric keys.



RFC 5958                 Asymmetric Key Packages             August 2010


   Additional information:

     Magic number(s): None
     File extension(s): .p8
     Macintosh File Type Code(s):

   Person & email address to contact for further information:

     Sean Turner <turners@ieca.com>

   Restrictions on usage: none

   Author:

     Sean Turner <turners@ieca.com>

   Intended usage: COMMON

   Change controller:

     The IESG

8.  References

8.1.  Normative References

   [RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate
               Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC4648]   Josefsson, S., "The Base16, Base32, and Base64 Data
               Encodings", RFC 4648, October 2006.

   [RFC5652]   Housley, R., "Cryptographic Message Syntax (CMS)", STD
               70, RFC 5652, September 2009.

   [RFC5911]   Hoffman, P. and J. Schaad, "New ASN.1 Modules for
               Cryptographic Message Syntax (CMS) and S/MIME", RFC 5911,
               June 2010.

   [RFC5912]   Hoffman, P. and J. Schaad, "New ASN.1 Modules for the
               Public Key Infrastructure Using X.509 (PKIX)", RFC 5912,
               June 2010.

   [X.680]     ITU-T Recommendation X.680 (2002) | ISO/IEC 8824-1:2002.
               Information Technology - Abstract Syntax Notation One.






RFC 5958                 Asymmetric Key Packages             August 2010


   [X.681]     ITU-T Recommendation X.681 (2002) | ISO/IEC 8824-2:2002.
               Information Technology - Abstract Syntax Notation One:
               Information Object Specification.

   [X.682]     ITU-T Recommendation X.682 (2002) | ISO/IEC 8824-3:2002.
               Information Technology - Abstract Syntax Notation One:
               Constraint Specification.

   [X.683]     ITU-T Recommendation X.683 (2002) | ISO/IEC 8824-4:2002.
               Information Technology - Abstract Syntax Notation One:
               Parameterization of ASN.1 Specifications.

   [X.690]     ITU-T Recommendation X.690 (2002) | ISO/IEC 8825-1:2002.
               Information Technology - ASN.1 encoding rules:
               Specification of Basic Encoding Rules (BER), Canonical
               Encoding Rules (CER) and Distinguished Encoding Rules
               (DER).

8.2.  Informative References

   [P12]       RSA Laboratories, "PKCS #12 v1.0: Personal Information
               Exchange Syntax", June 1999.

   [RFC2985]   Nystrom, M. and B. Kaliski, "PKCS #9: Selected Object
               Classes and Attribute Types Version 2.0", RFC 2985,
               November 2000.

   [RFC3447]   Jonsson, J. and B. Kaliski, "Public-Key Cryptography
               Standards (PKCS) #1: RSA Cryptography Specifications
               Version 2.1", RFC 3447, February 2003.

   [RFC5083]   Housley, R., "Cryptographic Message Syntax (CMS)
               Authenticated-Enveloped-Data Content Type", RFC 5083,
               November 2007.

   [RFC5208]   Kaliski, B., "Public-Key Cryptography Standards (PKCS)
               #8: Private-Key Information Syntax Specification Version
               1.2", RFC 5208, May 2008.

   [X.520]     ITU-T Recommendation X.520 (2005) | ISO/IEC 9594-6:2005,
               Information technology - Open Systems Interconnection -
               The Directory: Selected attribute types.

   [RFC5915]   Turner, S. and D. Brown, "Elliptic Curve Private Key
               Structure", RFC 5915, June 2010.






RFC 5958                 Asymmetric Key Packages             August 2010


Appendix A.  ASN.1 Module

   This annex provides the normative ASN.1 definitions for the
   structures described in this specification using ASN.1 as defined in
   [X.680] through [X.683].

   AsymmetricKeyPackageModuleV1
     { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9)
       smime(16) modules(0) id-mod-asymmetricKeyPkgV1(50) }

   DEFINITIONS IMPLICIT TAGS ::=

   BEGIN

   -- EXPORTS ALL

   IMPORTS

   -- FROM New SMIME ASN.1 [RFC5911]

   Attribute{}, CONTENT-TYPE
    FROM CryptographicMessageSyntax-2009
      { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9)
        smime(16) modules(0) id-mod-cms-2004-02(41) }

   -- From New PKIX ASN.1 [RFC5912]
   ATTRIBUTE
    FROM PKIX-CommonTypes-2009
      { iso(1) identified-organization(3) dod(6) internet(1)
        security(5) mechanisms(5) pkix(7) id-mod(0)
        id-mod-pkixCommon-02(57) }

   -- From New PKIX ASN.1 [RFC5912]

   AlgorithmIdentifier{}, ALGORITHM, PUBLIC-KEY, CONTENT-ENCRYPTION
     FROM AlgorithmInformation-2009
       { iso(1) identified-organization(3) dod(6) internet(1)
         security(5) mechanisms(5) pkix(7) id-mod(0)
         id-mod-algorithmInformation-02(58) }

   ;

   ContentSet CONTENT-TYPE ::= {
    ct-asymmetric-key-package,
    ... -- Expect additional content types --
   }





RFC 5958                 Asymmetric Key Packages             August 2010


   ct-asymmetric-key-package CONTENT-TYPE ::=
    { AsymmetricKeyPackage IDENTIFIED BY id-ct-KP-aKeyPackage }

   id-ct-KP-aKeyPackage OBJECT IDENTIFIER ::=
     { joint-iso-itu-t(2) country(16) us(840) organization(1)
         gov(101) dod(2) infosec(1) formats(2)
         key-package-content-types(78) 5
     }

   AsymmetricKeyPackage ::= SEQUENCE SIZE (1..MAX) OF OneAsymmetricKey

   OneAsymmetricKey ::= SEQUENCE {
     version                   Version,
     privateKeyAlgorithm       PrivateKeyAlgorithmIdentifier,
     privateKey                PrivateKey,
     attributes            [0] Attributes OPTIONAL,
     ...,
     [[2: publicKey        [1] PublicKey OPTIONAL ]],
     ...
   }

   PrivateKeyInfo ::= OneAsymmetricKey

   -- PrivateKeyInfo is used by [P12]. If any items tagged as version
   -- 2 are used, the version must be v2, else the version should be
   -- v1. When v1, PrivateKeyInfo is the same as it was in [RFC5208].

   Version ::= INTEGER { v1(0), v2(1) } (v1, ..., v2)

   PrivateKeyAlgorithmIdentifier ::= AlgorithmIdentifier
                                      { PUBLIC-KEY,
                                        { PrivateKeyAlgorithms } }

   PrivateKey ::= OCTET STRING
                     -- Content varies based on type of key. The
                     -- algorithm identifier dictates the format of
                     -- the key.

   PublicKey ::= BIT STRING
                     -- Content varies based on type of key. The
                     -- algorithm identifier dictates the format of
                     -- the key.

   Attributes ::= SET OF Attribute { { OneAsymmetricKeyAttributes } }

   OneAsymmetricKeyAttributes ATTRIBUTE ::= {
     ... -- For local profiles
   }



RFC 5958                 Asymmetric Key Packages             August 2010


   -- An alternate representation that makes full use of ASN.1
   -- constraints follows.  Also note that PUBLIC-KEY needs to be
   -- imported from the new PKIX ASN.1 Algorithm Information module
   -- and PrivateKeyAlgorithms needs to be commented out.

   -- OneAsymmetricKey ::= SEQUENCE {
   --  version                  Version,
   --  privateKeyAlgorithm      SEQUENCE {
   --   algorithm                 PUBLIC-KEY.&id({PublicKeySet}),
   --    parameters               PUBLIC-KEY.&Params({PublicKeySet}
   --                               {@privateKeyAlgorithm.algorithm})
   --                               OPTIONAL}
   --  privateKey               OCTET STRING (CONTAINING
   --                             PUBLIC-KEY.&PrivateKey({PublicKeySet}
   --                             {@privateKeyAlgorithm.algorithm})),
   --  attributes           [0] Attributes OPTIONAL,
   --  ...,
   --  [[2: publicKey       [1] BIT STRING (CONTAINING
   --                             PUBLIC-KEY.&Params({PublicKeySet}
   --                             {@privateKeyAlgorithm.algorithm})
   --                             OPTIONAL,
   --  ...
   --    }

   EncryptedPrivateKeyInfo ::= SEQUENCE {
     encryptionAlgorithm  EncryptionAlgorithmIdentifier,
     encryptedData        EncryptedData }

   EncryptionAlgorithmIdentifier ::= AlgorithmIdentifier
                                       { CONTENT-ENCRYPTION,
                                         { KeyEncryptionAlgorithms } }

   EncryptedData ::= OCTET STRING -- Encrypted PrivateKeyInfo

   PrivateKeyAlgorithms ALGORITHM ::= {
     ... -- Extensible
   }

   KeyEncryptionAlgorithms ALGORITHM ::= {
     ... -- Extensible
   }

   END








RFC 5958                 Asymmetric Key Packages             August 2010


Acknowledgements

   Many thanks go out to the Burt Kaliski and Jim Randall at RSA.
   Without the prior version of the document, this one wouldn't exist.

   I'd also like to thank Pasi Eronen, Roni Even, Alfred Hoenes, Russ
   Housley, Jim Schaad, and Carl Wallace.

Author's Address

   Sean Turner
   IECA, Inc.
   3057 Nutley Street, Suite 106
   Fairfax, VA 22031
   USA

   EMail: turners@ieca.com